| |
|
6 months 1 year 2 years 5 years 10 years 2024-10-04 Infinity #CM2SP3 v2.30 - [RawTool] Read/Write/Erase raw EMMC regions with predefined areas selection - Hardware faults on-boot predictor|detector - Empty/Erased device Partition Table detection revised for [FF] and [FDL] modes - Partiton Table health scanner for Primary/Secondary areas - [MemTool] => [PMT] => [Repair] function to fix damaged partition table as per found|recovered data - GPT writer updated - firmware verification process on firmware read and on flash file load - loaders set updated Report bugs and issues HERE Dongle firmware version required: 0163 Read more here 2024-09-26 Infinity #CM2MT2 v2.69 - AppTool, MDM, Mi Acc fixes for number of models - Boot process fixed for number of models - Error messages fixes for Flash Write - Firmware version output removed from Flash Write, info is available during firmware [Load] Dongle firmware version required: 0162 Read more here 2024-09-22 Infinity #CM2MT2 v2.68 - boot process simplified - antirollback handler updated - software startup process revised Dongle firmware version required: 0162 Read more here 2024-09-18 Infinity #CM2MT2 v2.67 - boot process for number of devices fixed ("hash mismatch" issue) - [RawTool] updated - [luci] processing revised - [Help] links to manuals for buttons. It can be disabled via [Settings] tab (software restart required) - Orange State function fixed - MDM process updated - Separate function added to Fix [can't make a call] - key.json file creation as separate function Dongle firmware version required: 0162 Read more here 2024-09-05 Infinity #CM2SP3 v2.29 - Boot process rebuilded to get more models supported - Latest loader (FDL and PAC file as loader) supported - Connection faults and unpreedictable hardware configurations detector rebuilded - erofs parser updated to fix MDM process for number of devices - Different FDL loaders can be used for selected device - Flash write process rebuilded - Partition table parser updated and write process revised - GPT parser updated - nvram parser revised - [Flash Format] function to erase whole flash chip - PSN write issue fixed - [INIT Partition Table] via [MemTool] accept as source bin/raw/pac/xml files - Separate [MDM Bypass] option - [Expand Userdata] feature for [MemTool] to expand storage size without flashing f.e. after flash chip replacement - Bootloader unlock process revised, more devices supported - Autobackup method revised - [Help] links to manuals for buttons. It can be disabled via [Settings] tab (software restart required) - New loaders available for download by [Get boot files] button Dongle firmware version required: 0162 Read more here 2024-09-04 Infinity #CM2MT2 v2.66 - MDM process revised - Separate option for [Make MDM File] Dongle firmware version required: 0162 Read more here 2024-09-01 Infinity #CM2MT2 v2.65 - Boot process updated for latest tecno, infinix and other models - DA for tecno/infinix 2024-08 and for many other devices included to boot-pack downloader via [get boot files] - nvram integrity detection method updated - nvram backup process revise Dongle firmware version required: 0162 Read more here 2024-08-06 Infinity #CM2MT2 v2.64 - Boot process revised - New DA and new models supported - [RawTool] rebuilded - [Reset] process revised - META/SVC mode rebuilded - Flash chip EOL fault method detection revised - [AppTool] search feature - Privacy Lock Reset process revised - Software messages and hints updated Dongle firmware version required: 0162 Read more here 2024-07-26 Infinity #CM2SP3 v2.28 - Bootloader unlock methods updated, new devices supported - Bootloader unlock during MDM disabled due to infinix/tecno BL issues - erofs parser rebuilded - MDM account bypass/reset (temporary) included to [Reset/Format] process - Bootpack Downloader processing revised - Flash chip EOL fault method detection revised - PSN read/write method revised - [AppTool] search option - Flash Write process revised Dongle firmware version required: 0161 Read more here 2024-07-11 More DA/models Get latest MTK DA [Get boot files] Doogee P3-Pro HiSense T5-Plus Honor ROD-W09 Huawei CAG-L22 Huawei Y3-II-4G Huawei LUA-U02 Oblue Tank-3 Tecno LH7n Huawei DRA-LX2 Huawei DRA-LX5 Infinix X6837 Lenovo TB-7104I Lenovo TB310XU LP Viper Mobicel Zoom-H Realme RMX3783 Realme RMX3785 Symphony Atom Teclast T50-Pro Tecno KJ7 Unihertz Tank-01 LP Viper Morep M610DS Tecno F1 Xiaomi Redmi-A1-ice 2024-07-10 More DA/models Get latest MTK DA [Get boot files] Doogee P3-Pro HiSense T5-Plus Honor ROD-W09 Huawei CAG-L22 Huawei Y3-II-4G Infinix X6837 Lenovo TB-7104I Lenovo TB310XU LP Viper Mobicel Zoom-H Realme RMX3783 Realme RMX3785 Symphony Atom Teclast T50-Pro Tecno KJ7 Unihertz Tank-01 LP Viper Morep M610DS Tecno F1 Xiaomi Redmi-A1-ice 2024-07-09 More DA/models Get latest MTK DA [Get boot files] Acer B3 Blackview N6000 Cubot KingKong-9 Doogee P3-Pro Doogee S100 Doogee S100-Pro Doogee Smini Doogee X10 GeneralMobile G514 Infinix X670_v6 Infinix X672_v6 Infinix X6731B Infinix X676C Infinix X678B_v6 Infinix X6821 Infinix X6827_v6 Infinix X6833B Infinix X6837 Lenovo TB-350FU Moto E(6s) Oppo CPH2481 Oscal Tiger-12 Oukitel WP27 Qin DuoQin-3-Ultra Realme RMX3561 Realme RMX3630a Realme RMX3782 Symphony Z35 TCL 4049D TCL 8051 Tecno AD10_v6 Tecno AD8_v6 Tecno AD9_v6 Tecno CI8_v6 Tecno CK7n Tecno KJ6 Tecno KJ7 Tecno LH7n Ulefone Armor-17-Pro Ulefone Armor-21 Xiaomi emerald Doogee X10 Lenovo TB-8505F Nokia 1-Plus TCL gaia 2024-07-08 More DA/models Get latest MTK DA [Get boot files] Infinix X6731B Infinix X6851 INOI 2_T961BE Moto G54 Nokia 3 Nothing 2A Oppo CPH2357 Oppo CPH2481 Oppo PGX110 Realme RMX3630 Realme RMX3636 Tecno CL7 Vivo PD2284F Xiaomi fire Xiaomi Redmi-K60-Ultra-corot Xiaomi Redmi-Note-13-Pro+-5g-zircon Lenovo A7-30DC Samsung SM-A037F Samsung SM-A042F Xiaomi fire Xiaomi Redmi-13c-Gale Xiaomi water 2024-07-07 More DA/models Get latest MTK DA [Get boot files] Infinix X670_v6 Infinix X6731B Moto E22 Oukitel WP21_v6 Qin DuoQin-3-Ultra Moto E22 Umidigi A9-Pro 2024-07-06 More DA/models Get latest MTK DA [Get boot files] Infinix X670_v6 Infinix X672_v6 Infinix X6731B Infinix X678B_v6 Infinix X6827_v6 Infinix X6833B Infinix X6837 LT 9701 Moto G72 Oblue Tank-2 Realme RMX3630a Tecno AD10_v6 Tecno AD8_v6 Tecno AD9_v6 Tecno CI8_v6 Tecno CK7n Tecno KJ7 Tecno LH7n Vivo PD2285F Xiaomi Redmi-Note-13-Pro+-5g-zircon Alcatel T612 Qin DuoQin-F21-Pro Samsung SM-A055F 2024-07-05 More DA/models Get latest MTK DA [Get boot files] Blackview A200 Blackview BV5500 Cubot KingKong-9 Cubot X70 Doogee S100-Pro Doogee S98 Infinix X678B-2024 Moto G50 Oblue Tank-3 Oukitel WP27 Symphony Helio-80 Tecno KJ7-2024 Ulefone Armor-21 Ulefone Armor-22 Walton Xanon-X20 2024-06-23 Infinity #CM2MT2 v2.63 - [RawTool] interface bug fixed - Software messages and hints updated Dongle firmware version required: 0161 Read more here 2024-06-20 Infinity #CM2MT2 v2.62 - Test-Point info included into [boot-pack] Downloader - Preloader files included into [boot-pack] Downloader - Bootpack Downloader processing revised - [AppTool] Expert Mode with extended list of files - Firmware parser rebuilded - erofs driver engine revised - Startup Logs method updated, partition size limit changed - Processing time display for number of operations - [RawTool] calculate size on start address change - Internal changes and optimizations Dongle firmware version required: 0161 Read more here 2024-06-06 Infinity #CM2SP3 v2.27 1300+ devices in list - Boot process and software detection method revised, initial connection become much faster - Test-Points images included to device dtabase - Online device list and database update - PSN1/2/3 Read/Write - RPMB backup process revised - MDM process revised - [AppTool] process revised, [Expert Mode] enabled - Devices list updated with more models and parameters - Built-in boot pack and config files updated - PAC file flashing - [MemTool] RPMB wipe function - [MemTool] boot1/boot2 EMMC area read/write - Computer Sleep disabled during flash read/write operations - erofs driver engine revised - Minor gui changes - Internal improvements and fixes NOTE: Installer has no test-points! To download test-point for selected device use [Get boot files] button Dongle firmware version required: 0161 Read more here 2024-05-23 Infinity #CM2MT2 v2.61 - Updated nvram backup method before firmware write - Updated nvram backup method for format/reset process - Issue with DA selection fixed Dongle firmware version required: 0160 Read more here 2024-05-22 Infinity #CM2MT2 v2.60 - Custom DA files selection issue fixed - DA selection method revised - Minor gui changes Dongle firmware version required: 0160 Read more here 2024-05-19 Infinity #CM2MT2 v2.59 - [boot-pack] On Demand Downloader: Device list download process updated Software restart after update is not required Confirmation before clear existing files Remove unused items from device list - [AppTool] file list save method changed - [MDM File] option returned back with more deep structure detection - Backup Create/Restore button names changed - restored similar to previous text - Backup process updated with A/B slots - [Reboot] process fixed for [Live Boot] mode - Internal changes and optimizations Dongle firmware version required: 0160 Read more here 2024-05-05 Infinity #CM2MT2 v2.58 - MDM, PSN, [AppTool], [MemTool], [RawTool], boot-pack on Demand - Firmware version detection method updated, process goes much faster - Reboot On|Off option behaviour changed - SoC/Model/DA Selector revised - Connection process for completely erased devices changed - [Identify] process updated for faulty units better detection - Flasher/SCAT loader menu updated - [RawTool] rebuilded - [AppTool] menu updated with Find First/Last/Next/Previous options - [boot-pack] On Demand Downloader: Offline boot-pack installation is not required DA/Auth/Preloader files loaded from server on model selection via [Get boot files] - [MDM File] option removed as useless - [MDM] process rebuilded, it works without account/username - Backup engine and process rebuilded - PSN REad/Write method updated - GUI changes - Internal changes and optimizations Dongle firmware version required: 0160 Read more here 2024-05-03 Infinity #CM2MT2 boot-pack v2.47r2 - updated DA and more compact format More models supported Read more here 2024-04-15 Infinity #CM2MT2 v2.57 - [AppTool] feature, [MMC EOL Reset] and more IMPORTANT NOTE: v2.56 has bug with firmware read process, thanks to friends who tested and reported the issue! Fixed version will be released in nearest hours! [AppTool] feature - Print list of available/installed APK - Disable any (even system) APK pernamemntly - Disabled APK stay disabled even after Reset or Wipe - Save list of installed APK to file - Restore disabled APK back anytime - Extremely fast processing NOTE: Bootloader must be unlocked for this operation! What [AppTool] can do: - OTA On/Off - MDM/Admin Apps On/Off - Bloatware/Telemetry/Spy Apps On/Off - Network/Operator addons On/Off - And many more features depends on your fantasy - Boot files selection method updated - DA selection method updated - [MemTool] gui changes - [MemTool] functions rebuilded - [MMC EOL Reset] function to attempt to extend faulty EMMC lifetime - PSN Read/Write function released - [MDM] method updated including infinix/tecno/itel handling - BT/WiFi MAC addrees read method updated - SCAT file load method changed, preloader become un-checked by default - [Format/Reset] methods updated - [Format/Reset] separate [Accounts] option released - key.json generation for generic devices - boot-pack integration method changed - GUI changes - Internal changes and optimizations Dongle firmware version required: 0160 Read more here 2024-04-04 Infinity #CM2MT2 boot-pack v2.45-b - small size package with new DA and new models Install small size #CM2MT2 boot-pack v2.45-b in addition to #CM2MT2 boot-pack v2.45 to get latest DA/models supported Updated: Doogee, Infinix, Realme, Tecno, Ulefone, Xiaomi Read more here 2024-03-13 Infinity #CM2SP3 v2.26 - RPMB, AppTool, more SoC supported - Many new models in list - SC7731e [FF] protocol released for advanced service options - [RPMB Write] function in addition to previously released [RPMB Read] - RPMB Smart Write enabled to optimize and make faster RPMB write process - Filesystem parser (ext4) revised - RPMB autobackup on Connect - [Change Active Slot] option for [MemTool] - [Device-ID] functions revised - GPT parser revised [AppTool] feature via [FF] mode - Print list of available/installed APK - Disable any (even system) APK pernamemntly - Disabled APK stay disabled even after Reset or Wipe - Save list of installed APK to file - Restore disabled APK back anytime - Extremely fast processing NOTE: Bootloader must be unlocked for this operation What [AppTool] can do: - OTA On/Off - MDM/Admin Apps On/Off - Bloatware/Telemetry/Spy Apps On/Off - Network/Operator addons On/Off - And many more features depends on your fantasy - Devices list updated with more models - Built-in boot pack files updated - Config options save/restore on startup - Minor gui changes - Internal improvements and fixes HOW TO USE Dongle firmware version required: 0160 Read more here 2024-02-28 Infinity #CM2MT2 v2.54 - Boot process revised - MDM process revised - Mi Account process revised - Server access method updated - Local config files updated to avoid unnecessary server calls - Firmware Read estimated time to end indication - GUI changes - Internal changes and optimization applied Dongle firmware version required: 0159 2024-02-26 Infinity #CM2MT2 v2.53 - many new devices supported and more features - MT6855 and MT6879 support - More devices without open/test-point supported - New DA included in package - Boot flow and DA selection process updated - Firmware version detection method updated - Firmware version detection issue fixed - [Smart Reset] and [Wipe] methods updated - tee/google key method revised - Startup logs analyzer method revised - Startup logs analyzer directory/file tree structure changed - [FixDL] operation revised - [MDM] process revised, more devices for direct process supported - [MDM] process adjusted for tecno/infinix - extcsd backup file name format changed - Memory management revised - [LeveBoot] option value restore on restart - "HW Report" output changed - FRP processing changed - Minor gui changes - Many internal changes and optimization applied Dongle firmware version required: 0159 Read more here 2024-02-24 Infinity #CM2SP3 v2.25 released - More firmware layouts supported - Partition table parser revised - [Repartition] function revised HOW TO USE Dongle firmware version required: 0159 Read more here 2024-02-23 Infinity #CM2SP3 v2.24 released - [MMC EOL Reset], RPMB read and more features [FF] mode: - [MMC EOL Reset] function to attempt to extend faulty EMMC lifetime - [RPMB] read function - [Repartition] option during flashing - [MemoryTool] read partition table - [MemoryTool] INIT (write) partition table - Devices list updated with more models - Built-in boot pack files updated - Partition table analyzer updated - [MDM] Apply/Rollback methods improved - backup and firmware read/write process updated - [Service Report] option - Many internal improvements and fixes HOW TO USE Dongle firmware version required: 0159 Read more here 2024-02-12 Infinity #CM2SP3 v2.23 released - [MemoryTool], EXTCSD write and more features - Devices list updated with more models - [MemoryTool] initial release with Read/Write/Wipe partitions - [MDM] Apply/Rollback methods improved - Built-in boot pack files updated - EXTCSD parser revised - [MemoryTool] EXTCSD write option - Firmware version/strategy parser updated - Minor gui changes - Many internal improvements and fixes HOW TO USE Dongle firmware version required: 0159 Read more here 2024-02-09 Infinity #CM2SP3 v2.22 released - bootloader, mdm and more 800+ devices in list - Devices list updated with more brands and models - Device database [boot-pack] updated with more parameters - Bootloader unlock/lock for many devices - Additional [wipe] option during bootloader lock/unlock process - MDM fix [Apply] and [Rollback] for many devices - Firmware version detection issue (crash) fixed - "Device autosave" method on PAC selection updated - Boot pack files updated - Minor gui changes - Many internal improvements and fixes HOW TO USE Dongle firmware version required: 0159 Read more here 2024-02-05 Infinity #CM2MT2 boot-pack v2.45 - new DA and new models Many new DA and new models supported Read more here 2024-01-30 Infinity #CM2SP3 v2.21 released, 650+ devices supported 650+ devices in list - Devices list updated with more devices - Boot process revises, loaders incompatibility detection improved - Autosave [~user] profile for selected external PAC loaders - Protocol selection hints updated - Baudrate (connection speed) selection for [FDL] mode - Store partitions layout to backup - Firmware read option - Display estimated time to end of firmware read process - Disk free space verification on read - Minimize allocated storage space on read and truncate files to actual data size - Firmware write option by layout.txt and gpt.raw layouts - Firmware files selection for write with On/Off option for each file - Separate button for EXTCSD read - Protocol selection hints and suggestions as per selected device hardware - Selected SoC name included in operation header text - Firmware version detection method revised - Boot pack version check revised - Boot pack files updated - Free disk space verification method changed - gui fixes - Many internal improvements and fixes HOW TO USE Dongle firmware version required: 0159 Read more here 2024-01-17 Infinity #CM2SP3 v2.20r1 released, more SoC and 400+ new devices supported Completely rebuilded #CM2SP3 tool released with unique servicing methods and functions. More features comes step-by-step For now 400+ devices and number of SoC in list, unique hardware fault detection methods and special FireFly [FF] boot mode. HOW TO USE acer, agm, alcatel, alldocube, archos, benco, blackview, blu, bimax, bq, chuwi, coolpad, cubot, dexp, digma, doogee, doro, foxdd, freeyond, general-mobile, gionee, headwolf, hiper, hisence, honor, hotwav, htc, IIIF150, infinix, inoi, itel, jumper, kenxinda, lava, lenovo, letv, lg, meizu, micromax, motorola, myphone, n-one, oppo, oukitel, panasonic, philips, phonemax, prestigio, realme, samsung, signma-mobile, sunwind, tcl, teclast, tecno, topdevice, tp-link-neffos, ulefone, umidigi, uniwa, vastking, wiko, xgody, xiaolajiao, xiaomi, zte SoC: T310, T606, T609, T610, T612, T618, sc9230, sc9820, sc9832, sc9863, UMS512, UMS9230 - [LiveBoot mode] activated: boot once, do what you want - Standard FDL and custom FireFly [FF] loaders are supported - External FDL1/FDL2 loaders support - External PAC file as loader support - Server authentication for number of operations available - EXTCSD EMMC info extractor - EMMC chip health status report to detect faulty EMMC - HW|SW Report: extract startup logs/faults - Device hardware and software info read on [Identify] - Sensitive data [Device-ID] backup create on [Identify] - Sensitive data [Device-ID] backup restore (own or with selection) - [Device-ID] read/write [diag] - [Device-ID] read [boot] - WiFi MAC address read - WiFi MAC address fix - Bluetooth MAC address read - Bluetooth MAC address fix - [Disconnect] button to release device connection - Reset frp - Reset filesystem: userdata - Reset filesystem: wipe - [Smart] reset to fix ota and nvram issues - PAC file information extractor - Sound alert on critical errors during read/write - Account status check - Updates checker - Progress display percent with decimal separator to be more precise - Separate operation log file in /log/ directory for each session - [Snap] button for instans software screenshot Dongle firmware version required: 0159 Read more here 2023-12-13 Infinity #CM2MT2 v2.52 - several hundreds of newest devices are supported - Boot procedure updated (BROM mode) - More loaders included in package - [Smart] Reset method updated - vivo sec processing updated - oppo regionlock via [Smart] Reset - Display FRP status during [Identify] - Firmware version detection method updated - MemTool path selection method updated - Reset FRP and Bootloader state options during flash write - Needless firmware version check during flash write removed - Legacy config parameters removed from [Settings] - Database location changed to /cfg/ directory - Minor gui changes - Many internal changes and optimization applied Dongle firmware version required: 0158 Read more here 2023-11-17 Infinity #CM2MT2 v2.51 NOTE 1: Many new methods are being applied to the latest models. Consider to install this version to new directory and in case of any issue with old models use previously released software version for it. NOTE 2: #CM2MT2 v2.51r1 has fixed gui issue with security values selection CPU/Platforms: LUCI: Protocol updated LUCI: Vendor-specific changes LUCI: RAMless support activated - RAMless DA must be used, automatic detection LUCI: New SOC: MT6835 support activated LUCI: New SOC: MT6985 support activated More brands are covered in this update: Realme, Oppo, Tecno, Infinix, Lenovo, Moto General changes: - New loaders and boot method for Tecno/Infinix (without test point) - New loaders and boot method for Vivo [luci] (without test point) - New loaders and boot method for Realme [luci] (without test point) - New loaders and boot method for Oppo [luci] (without test point) - New loaders generic models base_v2316 - Loaders config for xioami updated - Loaders storage tree updated to make easier selection - Boot procedure updated - Legacy devices (MT6580 and similar) connection process revised - Supported CPU list updated: MT6835, MT6985 - MemoryTool filesystem detection method updated - MemoryTool|RawTool updated - MemoryTool messages updated - MDM operations updated - Device info parser updated - Firmware analyzer updated - EMMC hardware fault detection improved - Server firmware verification method updated - Startup Logs Analyzer added to [HW|SW reports] - Format/Reset mode selection method changed, all operations rebuilded - [Probe rpmb] option for [Identify] - Filesystem(s) detection method updated - gui changes - Many internal changes and optimization applied Dongle firmware version required: 0158 Read more here 2023-10-10 Infinity #CM2MT2 v2.50 CPU/Platforms: LUCI: protocol updated LUCI: vendor-specific protocol(s) activated for some secure brands/models LUCI: Dimensity 7200 (MT6886) support activated LUCI: Supported chipset list for now: MT6781 ,MT6789, MT6886, MT6895, MT6983 RAPH: Preloader mode support updated RAPH: FireFly protocol updated Loaders updated: Tecno/Infinix/2023-10 Boot procedure updated Live Boot: Allow keep device in flash mode (booted) between operations: boot once and make different operations Reboot button: when liveBoot operations are finished Firmware Reader: Android 13 specific changes Identify: Firmware structure detection method changed Firmware integrity verificator become optional MemoryTool: A/B set, A/B switch: allow switch partition. May be useful in case of specific devices, which fail to dm-verity due to strange a/b config RawTool activated: Allow read/write/erase storage partitins by adress and storage section Other changes: - Storage detection process rebuilded - Xiaomi [Mi Account] operations revised - [MDM Fix] process updated - Rollback option for [MDM Fix] operation - Sparse image handling operations updated - Scatter handling engine updated - Port speed switch on boot process revised - [High-Speed] On|Off boot switch - may be useful for legacy devices (f.e. MT6580) if boot process freez at speed switch - External utilities moved to separate packages - Firmware integrity verificator become optional - Server connection engine revised - Error reporting engine rebuilded - Software conflict detection engine rebuilded, TeamViewer and Anydesk removed from blocklist - Many internal changes and optimization applied Dongle firmware version required: 0157 Read more here 2023-10-08 Infinity #CM2SP2 Diag Helper tool v1.14 - diag mode connection revised - server connection method changes - dll files moved to /lib/ directory - Fixed issue with unpredictable software close on Diag connect - internal changes related to memory management Read more here and Read more here 2023-09-17 Infinity #CM2MT2 v2.49 - MDM Fix process updated and more - [MDM Fix] file creation process rebuilded, more image types supported - [MDM Fix] fast direct one click process released. Number of supported devices may be limited for now - Meizu operations revised - Xiaomi operations revised - Server hints/loaders downloading method updated - Firmware info extraction on [Identify] method updated - Information about written images furing flash changed - Retrieve MDM state on [Identify] - Retrieve network options on [Identify] - eMMC crc verification on boot - Loaders updated - Many internal changes and optimization applied Before run this tool Uninstall or Disable: TeamViewer, Anydesk, Ultraviewer, Ammyy Admin And Stop Services: TeamViewer, Anydesk, Ultraviewer, Ammyy Admin 1. Right click on This PC => Manage => Services and Applications => Services => Double click to service 2. Click to [ Stop ] button 3. Select Manual and click to [ OK ] Dongle firmware version required: 0156 Read more here 2023-09-03 Infinity #CM2MT2 v2.48 Main: - Vivo without test-point improved and support more flash chip types - Boot process slightly updated - [MDM Fix] option for security plugins, payjoy etc. - [Orange State] operation revised - Flash write config options updated - Flash write process algo revised - SCAT loader revised Other changes: - software messages and hints updated - minor ui changes - many internal changes and improvements Dongle firmware version required: 0156 Read more here 2023-08-16 Infinity #CM2MT2 v2.47 - FireFly over preloader mode and more features without test-point Main: FireFly DA activated for RAPHAEL devices in preloader mode. Support wide range of generic and secure devices on most of the following chipsets: MT6755, MT6761, MT6763, MT6765, MT6768, MT6771, MT6779, MT6785, MT6833, MT6853, MT6873, MT6893 - For secure devices in preloader mode you must use appropriate vendor DA. - MT2 package contain range of secure PRELOADER DA for vendor f.e. Tecno, Infinix, Vivo It helps to service device over PRELOADER mode without Test-Point - You can use own private Preloader DA with any vendor restrictions freely Now over preloader with default range of service features you also got Bootloader unlock, RPMB, MemoryTool and other extended service stuff. Solution tested and support on wide range of DA from 2017 up to 2023. MT6755, MT6761, MT6765, MT6763, MT6771, MT6779, MT6768, MT6885, MT6853, MT6785, MT6873, MT6833, MT6893 Vivo: Y33s, Y30g, Y51, Y53s, Y19, Y5s, V17-Neo, S1-P65, Y7s, Y21a|V2149, V15|1819, S1|1907N, Y15s|V2120 and more. - LUCI protocol updated - RAPHAEL protocol updated - META/SVE mode protocol management updated Boot process: - process flow updated - process messages and error handling updated - connection rebuild in BROM/PRELOADER mode Service: - Backup restore fixed in "restore all" mode - Firmware Reader updated - Bootloader unlock process updated (Xiaomi) Flash Engine: - UltraFlash protocol updated Other changes: - server protocols revised - hardware compatibility engine updated - software messages and hints updated - minor ui changes - many internal changes and improvements Dongle firmware version required: 0156 Read more here 2023-07-29 Infinity #CM2MT2 boot-pack v2.43 with updated loaders - New models included - Directory tree and file names updated If you do not care about disk space just install boot-pack To avoid duplicated files and save disk space: 1. Delete /CM2MT2/boot/ directory 2. Install CM2MT2 3. Install this boot-pack Read more here 2023-07-13 Infinity #CM2MT2 boot-pack v2.42 with updated loaders Many models added and updated Read more here 2023-07-12 Infinity #CM2SP2 boot-pack v1.24 with updated loaders Advan, ITel, Kiowa, Realme, Tecno Read more here and Read more here 2023-07-07 Infinity #CM2MT2 v2.46 LUCI Devices: - MT6983 support fixed - UltraFlash protocol updated Firmware Reader: - Automatic detection activated - Software now allow correctly read most modern devices even if they are not tested - Avoid possible problems with OTA, damaging vendor-unique stuff or any other identification data Firmware Analyzer: - Strategy detection revised - Firmware version detection methods updated Bootloader unlock: - Oppo/Realme specific changes Factory Reset: - Complete rebuild to automatic / vendor strategy depend mode Boot methods: - boot/DA database management revised SCAT loader: - Display firmware info on file load - Display firmware info on flash write start - Verify loaded image via server Other changes: - messages and hints updated - minor ui changes - many internal changes and improvements Dongle firmware version required: 0155 Read more here 2023-07-06 Infinity #CM2SP2 boot-pack v1.23 with updated loaders Accent, Advan, Blackview, BQ, Condor, Gionee, Hisense, Huawei, Hurricane, Hyundai, iGET, Infinix, iTel, gplus, Lanix, Lava, Lenovo, Mobicel, qctech, Realme, Symphony, Tecno, Umidigi, Walton, WE, ZTE Read more here and Read more here 2023-06-12 Infinity Android Service Tool #AST v1.06 - startup process and external dll's handling method revised - external dll's moved to /lib/ - external dll's verification method updated - packed firmware files handling updated - remote files verification method changed - separate fscard.ini file is not required any more - auto-update check method changed to once per day - minor ui changes - many internal changes and improvements Dongle firmware version required: 0154 Read more here and Read more here 2023-06-08 Infinity #CM2MT2 v2.45 - startup process and external dll's handling method revised to avoid 0x0c000007b issue with damaged libusb installation - boot process revised - boot/sla error handling method changed - flash read process revised: luci handling updated and more detailed output - EMI database structure updated - MemoryTool file path handling updated, non-existent path check - external dll's moved to /lib/ - external dll's verification method updated - separate fscard.ini file is not required any more - strategy detector updated: honor - "Restore backup" process revised, issue with filelist fixed - flash writer display source file size instead of partition size - flash reader: [Create SCAT] option - gui resize bug fixed - auto-update check method changed to once per day - messages and hints updated - minor ui changes - many internal changes and improvements NOTE: install latest CM2MT2 boot-pack for best results - https://infinity-box.com/?r=100188 Dongle firmware version required: 0155 Read more here 2023-06-02 Infinity #CM2MT2 boot-pack v2.41 with updated loaders Ant, Oukitel, Symphony and `generic` structure updated Read more here 2023-05-18 Infinity #CM2SP2 boot-pack v1.22 with updated loaders Alcatel/TCL, Blu, BQ, Hisense, iTel, G-Tab, Lenovo, Prestigio, Realme, Reeder, Safaricom, Symphony, Tecno, Wiko, ZTE Read more here and Read more here 2023-05-14 Infinity #CM2MT2 v2.44 Infinix/Tecno no need Test Point and more features NOTE: v2.44r2 has updated device database - use it in case of connection issues. General: - Device info detection revised - EMI processing for legacy hardware (f.e. MT6580) revised - EMI database rebuilded - Meizu operations revised - New feature: BROM On|Off - allow enable BROM mode and allow do extended services such as: All FireFly Features: Boot unlock, testing, service etc. All FireFly DA features: Boot unlock, RPMB, service and other - Display partition/image size during flash Read/Write - Device information parser updated - DA selection mode revised - DA information/hints displayed on selection for number of loaders - DA config database updated - Red|Orange state methods revised - Incompatible image confirmation during Flash fixed - Simlock methods output updated - Format methods output updated - Infinix and Tecno without test-point/disassembly by this manual for MT6739, MT6761, MT6763, MT6765, MT6768, MT6781, MT6785, MT6833, MT6877, MT6893 MemoryTool: - Bulk Read/Write operations updated: selection and Read/Write path sync - Read/Write file path handling method on file select/cancel revised - Messages & errors|hints updated Backup: - Backup restore process updated with any record On|Off selection - Select All/None items by right mouse click User Interface: - Startup window position config revised - Software messages & hints updated Internal changes - Memory management revised and more important changes Dongle firmware version required: 0155 Read more here and Read more here 2023-05-10 Infinity #CM2MT2 Helper tool v1.03 - preloader file|partition parser/converter updated - account/balance check - minor gui changes - internal changes related to memory management Read more here 2023-04-23 Infinity #CM2SP2 boot-pack v1.21 with updated loaders Benco, Blu, Condor, Hisense, Hotwav, Infinix, iTel, Lanix, Lava, Lenovo, Micromax, Motorola, Safaricom, Smooth, Symphony, Tecno Read more here and Read more here 2023-04-22 Infinity Android Service Tool #AST v1.05 - ADB protocol management revised - Update checker - Minor gui changes - Internal improvements - Applications lists updated Dongle firmware version required: 0154 Read more here and Read more here 2023-04-20 Infinity #CM2MT2 v2.43 WARNING: Possible issue found during Flash with incompatible image. If you will see question DEVICE <-> FIRMWARE PartTable missmatch! Continue may destroy device security! and you want to stop process - DISCONNECT CABLE due to in some cases software may continue even if you click to No General: - Device/Firmware detection method updated - Boot process flow slightly changed - Boot/Shutdown process updated - Partition table analyzer rebuilded (primary/secondary) - Service operations updated - red/orange state and bootloader unlock - Bootloader lock/unlock process flow updated - Service Report revised - FileSystem type output revised - Device handling Strategy type output revised - scat load & emi management for "flash write" revised - MemoryTool operations revised and bugs with menu selection fixed - Security values processing updated - META mode output revised - Preloader parser revised - EMI handling for legacy devices fixed - Internal changes - memory management and more User Interface: - FLASH/META mode selection changed - DA Protocol selection changed - Software messages & hints updated Dongle firmware version required: 0154 Read more here 2023-04-18 Infinity Android Service Tool #AST v1.04 - Connection methods updated for ADB and Fastboot - Latest dll's included in package - Log engine updated - Stop/Logs/Snap buttons - gui updated - user interface save/restore options - aplication list save on Identify - Device messages output method revised - Hints and error messages updated - "Uninstall Apps" for batch processing by apk list loaded from text file - "Pixel" bypass method - Many internal changes Dongle firmware version required: 0154 Read more here and Read more here 2023-04-15 Infinity #CM2SP2 boot-pack v1.20 with updated loaders Ace, Blu, Digma, Fly, Gionee, Hisense, Incar, Infinix, Irbis, iTel, Just5, Lava, Lanix, Lenovo, Maximus, Mobicel, Realme, Smooth, Symphony, Tecno, Tigo, Vankyo, ZTE Read more here and Read more here 2023-04-12 Infinity #CM2SP2 boot-pack v1.19 with updated loaders Blu, Condor, Disko, Hisense, Huawei, Infinix, iTel, Lenovo, Mobicel, Realme, Reeder, Safaricom, Samsung, Symphony, Tecno, Vodafone, ZTE Read more here and Read more here 2023-04-10 Infinity #CM2SP2 Diag Helper tool v1.09 - pac file parser/analyzer updated - minor gui changes - internal changes related to memory management Read more here and Read more here 2023-04-08 Infinity #CM2SP2 boot-pack v1.18 with updated loaders AndroidP, BQ, g-tab, Hisense, Huawei, Infinix, Irbis, iTel, Jio, Lava, Mobicel, Motorola, QMobile, Realme, Samsung, Symphony, Walton, ZTE Read more here and Read more here 2023-03-30 Infinity #CM2SP2 Diag Helper tool v1.08 [*] diag mode connection revised [*] pac file analyzer updated [+] direct account/balance check Read more here and Read more here 2023-03-26 Infinity #CM2SP2 Diag Helper tool v1.07 [+] pac file analyzer updated - more info extracted from image Read more here 2023-03-21 Infinity #CM2SP2 Diag Helper tool v1.06 [+] pac file analyzer [*] diag mode connection updated Read more here 2023-03-14 Infinity #CM2MT2 Helper tool v1.01 - ofp file to scat parser/converter - preloader file|partition parser/converter updated Read more here 2023-03-08 Infinity #CM2MTK v1.58a - installer engine updated - boot-pack included to installer If you have CM2MTK v1.58 + Supplementary Boot Pack for v1.58 already installed you DO NOT need to download/install 1.58a 2023-03-06 Infinity #CM2SP2 boot-pack v1.17 with updated loaders Mango, Motorola, Prestigio, QMobile, Realme Read more here 2023-03-03 DongleManager v1.93 [+] Subscription date check [+] libeay32.dll & libssl32.dll startup check [*] Minor UI changes 2023-02-18 Infinity #CM2SP2 boot-pack v1.16 with updated loaders Dexp, iTel, Infinix Read more here 2023-02-13 Infinity Chinese Miracle-2 #CM2MT2 v2.42 General: - Maintenance release - Memory management improved - Many internal changes - Boot time flow process updated - Boot time error handling improved User Interface: - flash chip info output revised - software messages & hints updated Dongle firmware version required: 0154 Read more here 2023-02-12 Infinity Chinese Miracle-2 #CM2MT2 v2.41 General: - FireFly core loader updated: /XFireFly/base/FireFly_AllInOne_DA.bin - FireFly mode operations updated such as bootloader unlock etc. - Many internal changes Image management: - Preloader parser/converter updated - Preloader/EMI open dialog updated for bin/img files - DA, Cert, Auth, Preloader load/verification method updated User Interface: - log management engine updated - software messages revised Dongle firmware version required: 0154 Read more here 2023-02-09 Infinity #CM2SP2 Diag Helper tool v1.05 Use it in case of DIAG/SVC mode failure with latest SPD|UNISOC devices and for Wipe, User Data and Security Code Reset [+] Connection protocol updated [+] Minor User Interface changes with Snap|Screenshot button and log files easy access Read more here 2023-01-30 Infinity Chinese Miracle-2 #CM2MT2 v2.40 General: FireFly : Protocol updated FireFly : Activated new operations 1. Firmware Read 2. Firmware Write 3. MemoryTool : EXTCSD Read 4. MemoryTool : EXTCSD Write FormatFS: Smart Reset updated: New types supported Smart Reset updated: Android 13 specific changes Firmware reader: Firmware Read activated in FireFly mode Android 13 support improved [under test] Firmware flasher: Flasher Engine updated : [LUCI], [RAPH] and [LEGACY] protocols updated Firmware Flashing activated in FireFly mode Service: Identify : Now read active system info if device belong to AB BootLoader: Unlock/Lock revised in FireFly and MTK mode MemoryTool: New Operation : EXTCSD read - Allow read EXTCSD config from eMMC. Made default at boot also New Operation : EXTCSD write - Allow write EXTCSD config in eMMC Both operations supported only in FireFly mode for now! The Rest: Loaders updated Previous versions of loaders partially moved to CM2MT2 boot-pack CM2MT2 boot-pack v2.40 or newer should be installed to get latest loaders Log output management updated BugFixes and minor updates Dongle firmware version required: 0154 Read more here 2023-01-28 Infinity #CM2MT2 boot-pack v2.40 with updated loaders Loaders & structure updated [+] Condor [+] Dlight [+] Xiaomi/Redmi-9c/ linked to base-2112 + preloader file from /Redmi-9/ [+] Xiaomi/Redmi-9a/ updated with preloader file from /Redmi-9/ [+] legacy loaders moved to /0_rare/ [+] /0_base/v17xx/ moved to boot-pack [+] /0_base/v18xx/ moved to boot-pack [+] /0_base/v19xx/ moved to boot-pack [+] /0_base/v20xx/ moved to boot-pack CM2MT2 v2.39 and higher should be used with the next loaders: [+] Infinix/Infinix-G99-General/ [+] Infinix/Dimensity-9000/ [+] Infinix/X676B/ [+] Tecno/Tecno-G99-General/ [+] Tecno/Dimensity-9000/ [+] Tecno/Phantom-X2-X2Pro/ [+] /0_generic/ loaders for latest MT6781/MT6789/MT6983 are inside sw installer Latest boot-pack release has all previous boot-packs included, it means you should only install latest one to get all loaders Read more here 2023-01-23 Infinity #CM2SP2 Diag Helper tool v1.04 Use it in case of DIAG/SVC mode failure with latest SPD devices and for Wipe, User Data and Security Code Reset [+] several types of devices handling improved Read more here 2023-01-10 Infinity #CM2SP2 Diag Helper tool v1.03 Use it in case of DIAG/SVC mode failure with latest SPD devices and for Wipe, User Data and Security Code Reset Read more here 2022-12-25 Infinity Chinese Miracle-2 #CM2MT2 v2.39 - MT6789 [Helio G99] and more Loaders updated: /boot/0_generic/MT6781_Generic [LUCI] /boot/0_generic/MT6789_Generic [LUCI] /boot/Infinix/Infinix-G99-General /boot/Infinix/Infinix-X676B /boot/Tecno/Tecno-G99-General General: New protocol supported: [LUCI] - MT6781, MT6789, MT6895, MT6983 etc. Supported: SecurityRepair : Generic lines support for latest phones in both FLASH and META mode FormatFS : SmartReset, SmartResetExtra - include reset settings, frp, privacy etc. FirmwareReading : Factory-like, complete, safe firmware, compatible with MT2 and SPFT too FirmwareFlashing : Correct, safe, factory and read firmware flashing support Service : Service operations supported : Identify, NVRAM operations, MemoryTool, HW Info etc. FormatFS: Smart Reset updated: New types supported Smart Reset updated: Android 11-12 specific changes Smart Reset updated: A/B devices specific changes Firmware reader: NEXTGEN [LUCI] phones line support Factory-like firmware reading now supported [LUCI] XML-scatter generation now supported [LUCI] Android 13 support activated [under test] Android 12 support improved Android 10-11 support rebuild AB devices support complete rebuild. All known formats supported. More accurate detection of vendor-specific partitions and handling Escape from OTA issues and other startup faults etc. on some phones Scatter creation for latest devices revised, more chip-depend versions now supported Firmware flasher: NEXTGEN phones line support [LUCI] Factory and Read firmware flashing now supported [LUCI] XML scatter, TXT scatter and flash.xml can be used as FlashFile input Service: Identify : Now read active system info if device belong to AB BootLoader: Unlock and Lock as separate buttons now BootLoader: Unlock in FireFly mode for LEGACY phones has been fixed BootLoader: Unlock in FireFly mode for some of RAPHAEL phones has been fixed MemoryTool: LUCI support, compatibility improvements The Rest: - Loaders storage structure updated [built-in] /boot/0_base/X_FireFly/ => /boot/XFireFly/base/ [boot-pack] /boot/0_base/MT6570_*/ => /boot/0_rare/MT6570_*/ [boot-pack] /boot/0_base/MT6771/ => /boot/Vivo/MT6771/ - Loaders package updated [built-in] /boot/0_base/base_v2216/ - Bases and Models list sort order revised - Firmware version parser revised - Error messages and usage hints updated - eMMC EOL status hints updated - Update checker revised Dongle firmware version required: 0154 Read more here 2022-12-24 Infinity #CM2SP2 Diag Helper tool v1.02 Use it in case of DIAG/SVC mode failure with latest SPD devices Read more here 2022-12-14 Infinity Platform Detector Tool #PDT v1.02 Easy and fast SoC type detection and software selection f.e. MTK/SPD/RDA/RKT/LGS etc. [*] detection algo updated [*] devices list updated [*] applications list updated [*] gui changes [*] updates checker Read more here 2022-12-07 Infinity Chinese Miracle-2 #CM2MT2 v2.38 - general improvements and fixes ATTENTION: In some cases CM2MT2 v2.38c8 may gives an issue: software questions may be answered Yes by default without waiting for your answer. Please download and install CM2MT2 v2.38d1 !!! WARNING !!! Backup files storage structure changed, files and folders will be compressed. Software will convert files and folders at first run! If you have important data - make /backup/ folder copy for emergency case! Process may takes time, BE PATIENT! - Startup process revised - Backup files are packed, zip and 7z formats are supported (7z.dll is required) - Backup files default format is 7z - Backup|Restore partitions list updated - Backup overwrite request for "Identify" only, skip existing backup replacement for other operations - Partition size verification during backup - File content verification (zeroes) during backup creation - File content verification (zeroes) during backup restore - Display hw|sw info to log during backup file selection - Restore backup images with .bin and .img extensions - Legacy settings values removed - MemTool work path save|restore - MemTool window position save|restore - MemTool ui changes - Log window style customization - HW Report behaviour changed depends on selected Platform - Cloud: display hw|sw info about last connected device - Cloud: get previously stored backup file - Flash chip vendors list updated - ufs parser revised - emmc parser revised - emmc failure detection improved - nand parser revised - Firmware read/write last selected path save|restore - scatter file creation process rebuilded - scatter file load process revised - META mode connection method revised - META mode info and device version output revised - META mode memory leak fixed - Check free disk space on startup - Check free disk space on Flash Read - Flash Read file selection method updated - Flash Read process termination revised - Backup before Reset in META mode - Backup before Reset in Flash mode - extcsd backup file content verification - PMT (partition table) info output slightly changed - PMT (partition table) info included to device.txt during backup - Store device.txt with hardware and software info to backup - Store device.txt with hardware and software info to firmware - Store device.txt file as ini - Store loaders config to device.txt file - Verify backup presence before process - Error messages and software hints updated - More software hints for [Format] operations - More messages in log about process flow - [SMART RESET EXTRA] error handling revised to recover after error - Create Screenshot [Snap] as .png instead of .bmp (quite compact) - Device brand|model detection revised - Updates checker rebuilded - External update checker disabled - External firmware uploader enabled - [Stop] process revised - Customs Settings -> EMI button extract prevoader from partition image on load - MemTool selection mode for 128 Mb and 256 Mb in list - MemTool file selection revised - MemTool operations revised - [Flash] page minor ui changes - [Security] page minor ui changes - [NVRAM Read] operation revised - [NVRAM Write] operation revised - NVRAM backup file format changed - [Restore Backup] operation allow to select backup file - [Restore Backup] has new restore mode [+preloader] - Check free disk space before backup - settings.ini new value [where] backup=backup\ - settings.ini new value [where] boot=boot\ - settings.ini new value [where] tools=..\tools\ - settings.ini new value [where] firmware=firmware\ - SC engine revised - Files verification config option in [Settings] page - Files verification for nvram backup enabled - Memory management engine revised - [KG] moved to [Misc] section - Dialogs texts revised. Message text will be visible in log window on selection - Minor log text messages and ui changes - Check required dll's on startup - ssleay32.dll included to installer to improve compatibility - 7z.dll included to installer - /tools/iosFileUploader included to installer Dongle firmware version required: 0153 Read more here 2022-12-05 Infinity #CM2SP2 boot-pack v1.15 with updated loaders ATouch, BQ, CallTouch, Dexp, Eager, iHunt, InnJoo, Invens, LiteTel, LYF-Jio, MyPhone, Realme, Samsung, Smart Read more here 2022-11-01 Infinity #CM2SP2 boot-pack v1.14 with updated loaders Colors, Hotwav, Mint, Mobicel, Strawberry Read more here 2022-10-17 Infinity #CM2SP2 boot-pack v1.13 with updated loaders BQ, Digma, Fly, Haier, Inoi, Irbis, iTel, Prestigio, ZTE Read more here 2022-10-11 Infinity #CM2SP2 boot-pack v1.12 with updated loaders Huawei /boot-fdl/ has FDL loaders: Blackview, Blu, BMobile, Infinix, iTel, Lenovo, Maxwest, Realme, Tecno, Yezz, ZTE Read more here 2022-10-07 Infinity Chinese Miracle-2 #CM2MT2 v2.37 - general improvements and fixes - "Restore Backup" config mode updated - "Restore Backup" allow to select files manually - Flash file (Scatter) Open|Select|Clean buttons at "Flash" page - Flash file (Scatter) parser updated - Flash file (Scatter) selection issue fixes - MemoryTool file selection issue fixes - MemoryTool gui minor changes - "Switch to HS USB" option removed - Config storage engine updated - Account Check gives balance and subscription date - "PMT Info" config value stored - "Flash" page minor gui changes - Loaders remote verification revised - Installer updated to manage previously installed boot-pack Dongle firmware version required: 0153 Read more here 2022-10-04 Infinity Chinese Miracle-2 #CM2MT2 v2.36 - general improvements and fixes - SmartInfo parser output revised - NVRAM parser output revised - Firmware remote verification enabled - Device remote verification enabled - Preloader parser revised and fixed - Peloader remote verification enabled - "KG State" moved to Service page - "Help" menu - View log files by right mouse click on message window - View log files via "File" menu - "Logs" button at main window to view log files - "Snap" button at main window to make screenshot - "Stop" button at main window - Verification for preloader|da|firmware integrity - Show current settings at operation start - Show "Local SLA" state at operation start - Show "Flash Write" settings at operation start - "HW Report" mode selection changed - "Check Account" button at "Settings" page to verify Username and Password validity - Loaders remote verification enabled - Show loaders information at boot time - Memory chip life-state warnings updated - "Stop" item removed from the top menu - Boot stage loader files information revised - "GUI Mode" item removed from the top menu and moved to "View" button - "Memory Tool" moved to "Service" page - "Make Service Report" moved to "Service" page - "Settings" -> "Firefy : EMI" menu item moved to "FireFly : AutoEMI" at "Settings" page - "GUI mode" save/restore on startup - "Change GUI mode" via "Settings" menu - HW Compatibility Wizard enabled - Server Hints engine enabled - "PMT Info" option at "Platform" page display Partition Info during "Identify" - "Save Boot Config" option at "Platform" page to store detected model config to models list Dongle firmware version required: 0153 Read more here 2022-09-20 Infinity #CM2MT2 boot-pack v2.35 with updated loaders Loaders updated & structure improved [+] MT6771 experimantal loader [0_base] Every new boot-pack release has all previous boot-packs included, it means you should only install latest one to get all loaders Read more here 2022-09-11 Infinity #CM2SP2 boot-pack v1.11 with updated loaders [+] Ais [+] BQ [+] Expert [+] FinePower [+] Ginzzu [+] Micromax [+] Oysters [+] Philips [+] Stark [+] teXet [+] Vertex Read more here 2022-08-30 Infinity Chinese Miracle-2 #CM2MT2 v2.35 - general improvements and fixes [*] Internal changes and fixes for protocols applied [*] Internal changes and fixes for flasher applied [*] Internal changes and fixes for preloader parser applied [*] Preloader database handling updated [*] Preloader database remote verification enabled by default [*] Log engine updated: log files created for each session and stored to /log/ directory [*] Deep Info parser enabled by default [*] User Interface updated [*] Product-specific Loader [DA] files moved to CM2MT2-boot-pack Dongle firmware version required: 0153 Read more here 2022-08-16 Infinity #CM2SP2 boot-pack v1.10 with updated loaders [+] G-Touch [+] Hotwav [+] Infinix [+] Mito [+] Mobicel [+] QC-QcTech [+] Realme [+] Symphony [+] Stylus [+] ZTE Read more here 2022-06-27 Infinity Data Explorer v1.12 - MTK, SPD updated and more improvements Data extraction based on full reconstruction of file system - MTK firmware structure detection improved - SPD firmware structure detection improved - Minor bugs fixed Dongle firmware version required: 0100 Read more here 2022-06-19 Infinity #CM2SP2 boot-pack v1.09 with updated loaders [+] Condor [+] HiSense [+] Kiowa [+] Lava [+] Micromax [+] Stylo Read more here 2022-06-05 Infinity #CM2MT2 boot-pack v2.33 with updated loaders loaders updated & structure improved [+] Huawei Read more here 2022-06-04 Infinity #CM2SP2 boot-pack v1.08 with updated loaders [+] iTel Read more here 2022-05-31 Infinity #CM2SP2 boot-pack v1.07 with updated loaders [+] Blackfox [+] Ginzzu [+] Hotwav [+] iGet [+] Infinix [+] Movitel [+] Nobby [+] Symphony [+] Teclast Read more here 2022-05-27 Infinity #CM2MT2 boot-pack v2.32 with updated loaders loaders updated & structure improved [+] Lenovo [+] Meizu [+] Moto [+] Oppo [+] Oukitel [+] QSmart [+] Realme [+] Symphony [+] TP-Link Nefos [+] Umidigi [+] Vivo [+] Xiaomi Read more here 2022-05-26 Infinity #CM2MT2 boot-pack v2.30 with updated loaders [+] Alldocube [+] Allview [+] Avvio [+] Azumi [+] BlackFox [+] Blu [+] Cloudfone [+] GeneralMobile [+] Hyundai [+] Infinix [+] Infocus [+] Injoo [+] iTel [+] Jazz [+] Leagoo Read more here 2022-05-23 Infinity #CM2 and [BEST] Pinout database v2.09 released [+] ISP pinouts included [+] pinouts [+] test-points [+] other information Read more here 2022-05-21 Infinity #CM2SP2 boot pack v1.06 with updated loaders [+] Akai [+] Alcatel-TCL [+] Archos [+] Benco [+] Blu [+] BMobile [+] BQ [+] Dany [+] Dexp [+] Digma [+] FinePower [+] Fly [+] GFive [+] Griffe [+] Huawei [+] Hurricane [+] iGET [+] Infinix [+] InnJoo [+] Inoi [+] Inovacel [+] Invens [+] iPro [+] Irbis [+] iTel [+] Kimfly [+] Krip [+] Lava [+] Mafe [+] Maxfone [+] Meizu [+] Micromax [+] Mobicel [+] Movitel [+] MyPhone [+] Nobby [+] Philips [+] Prestigio [+] QMobile [+] Revo [+] Rover [+] Safaricom [+] Skycell [+] Symphony [+] Tecno [+] Telcast [+] Telenor [+] Tesla [+] TP-Link_Neffos [+] UMax [+] VFone [+] Volte [+] Wiko [+] Xiaomi [+] Yezz [+] Yuho [+] Ziox [+] Zong [+] ZTE Read more here 2022-05-18 Infinity #CM2SP2 boot pack v1.05 with updated loaders [+] Alcatel-TCL [+] Alldocube [+] Benco [+] BQ [+] Doogee [+] HiSense [+] Infinix [+] Inoi [+] iTel [+] Maxwest [+] Micromax [+] Symphony [+] ZTE [~] incompatible loaders clearance Read more here 2022-05-16 Infinity #CM2SP2 boot pack v1.04 with updated loaders [+] Cheers [+] Condor [+] Gelsi [+] GFive [+] Goodone [+] Hena [+] HiTech [+] Hotwav [+] Huskee [+] iBall [+] iKon [+] Impression [+] i-life [+] Intex [+] Jazz [+] Jinga [+] Karbonn [+] Krip [+] Kimfly [+] KTouch [+] KuXing [+] Leagoo [+] Lemon [+] Lenovo [+] LYF-Jio [+] Manta [+] Mascom [+] Maxx [+] Micromax [+] Midas [+] Mifaso [+] Mobicel [+] Movitel [+] Motorola [+] MTech [+] MyPhone [+] Nomi [+] Philips [+] Prestigio [+] QMobile [+] Qnet [+] Rage [+] Reach [+] Reeder [+] Sansui [+] Simtronics [+] SmartMax [+] Spice [+] Symphony [+] Swipe [+] Tecno [+] Texet [+] True [+] Umidigi [+] Vertex [+] VFone [+] Videocon [+] Winds [+] Wynncom [+] Zears [+] Zen Read more here 2022-05-15 Infinity #CM2MT2 boot pack v2.29 with updated loaders [+] Huawei [+] Lenovo [+] Moto [+] Oppo [+] Tecno [+] Wiko Read more here 2022-05-14 Infinity #CM2MT2 boot pack v2.28 with updated loaders [+] Assistant [+] CCIT [+] HiSense [+] Infinix [+] Micromax [+] Prestigio [+] Xiaomi Read more here 2022-05-13 Infinity #CM2MT2 boot pack v2.27 with updated loaders [+] iTel [+] Mobicel [+] Mobiwire-Vodacom [+] Panasonic [+] QMobile [+] Ulefone [+] Vodafone Read more here 2022-05-12 Infinity #CM2MT2 boot pack v2.26 with updated loaders [+] Alcatel [+] Asus [+] Gionee [+] Helio [+] Meizu [+] Neon Read more here 2022-05-06 Infinity #CM2MT2 boot pack v2.25 with updated loaders [+] BQ [+] Fly [+] HiSense [+] HTC [+] Ibrit [+] Lava [+] Nubia [+] Vivo [+] ZTE Read more here 2022-05-05 Infinity #CM2MT2 boot pack v2.24 with updated loaders [+] Huawei [+] Oppo [+] Tecno Read more here 2022-04-30 Infinity #CM2MT2 boot pack v2.23 with updated loaders [+] Blu [+] Comio [+] Condor [+] Doogee [+] Fero Read more here 2022-04-27 Infinity #CM2SP2 boot pack v1.03 with updated loaders [+] Arise [+] BQ [+] Celkon [+] Cell-C [+] HiSense [+] Infinix [+] Irbis Read more here 2022-04-26 Infinity #CM2SP2 boot pack v1.02 with updated loaders [+] BlackView [+] Digma [+] Huawei [+] QMobile [+] ZTE Read more here 2022-04-25 iosFileUploader v1.16 - post-upload file verification - minor fixes Read more here 2022-04-24 Infinity #CM2MT2 boot pack v2.22 with updated loaders [+] Acer [+] Archos [+] Blackview [+] Oppo [+] Realme [+] Xiaomi Read more here 2022-04-22 Infinity #CM2SP2 boot pack v1.00 Infinity #CM2SP2 boot pack has more than 400 loaders for many different brands and models Read more here 2022-04-07 DongleManager v1.91 [+] Infinity Account Reset - password and e-mail update with dongle [*] User interface changes [*] Error reporting engine updated 2022-04-06 Infinity #CM2 and [BEST] Pinout database v2.08 [*] boot keys [*] pinouts [*] test-points [*] hardware types [*] keyboard codes [*] other information Read more here 2022-03-15 Infinity Chinese Miracle-2 CM2MT2 v2.34 - OP and RMX extra stuff [part 1/2] As ordinary unique #CM2 functions and methods released Core Changed: Protocol updated RAPHAEL/LEGACY MemoryTool Changed: Init GPT operations optimized Changed: RPMB operations optimized Flasher Changed: Protocol updated (RAPHAEL) Changed: UltraFlash protocol updated Changed: OFP direct support activated ( oppo and realme ) - Support normal and unmerged firmwares - Support region selection for unmerged firmwares - Make normal scatter as result FW Service Changed: "Smart Reset" optimized - Fixed issues with some A/B devices - Nokia, Tecno and similar models may be affected Changed: "Smart Reset Extra" option optimized - Fixed issues with some A/B devices - Nokia, Tecno and similar models may be affected - Smart Reset Extra updated: Improved Samsung support for Reset/Change KG Changed: Identify operation improved Changed: FixDL operation now support also fix Oppo and Realme devices "black screen" with DL error - Fix "download not completed" error - Fix device production and operation state in case of flash erase or other fails - Fix device ocdt params in case of erase or after factory cdt download - Just run FixDL and software will make all automatic - In some case (f.e. device with multi-config and "new" type) operation may require device reflash with correct files Firmware Reader Changed: Core optimized Changed: Android 12 initial support Changed: Internal DB update Forensic Changed: "Smart Reset Data Safe" operation optimized - OPPO : Engine has been rebuild to "safe" mode (no factory reset in case of unsupported version/config) - OPPO : Confirmed and working with "original" manufactured models - A15, A5s and similar devices - OPPO : Not work with OEM-made models - A1k and similar devices Other Changed: FireFly : Sparse flashing optimized, modern images are supported now Changed: Samsung KG : Separate change state button activated, kg operations optimized Changed: Many importnatn internal changes, bugfixes and improvements Dongle firmware version required: 0153 Read more here 2022-03-06 Tecno files at Infinity #CM2 support CD6, CD6j, CD6s, CD7, CD8, CD8j, CE7, CE7j, CE8 2022-03-01 Infinity #CM2 and [BEST] Pinout database v2.07 - boot keys - pinouts - test-points - hardware types - keyboard codes - other information 2022-02-24 iTel files at Infinity #CM2 support IT2050V, IT2090, IT2100, IT2100S, IT2110, IT2120, IT2123, IT2123V Read more here 2022-02-20 Tecno files at Infinity #CM2 support CA7, CA8, CA8S, CB7, CB7j, CC6, CC7, CC7S, CC9 Read more here 2022-02-14 How to use Infinity CM2 or [BEST] Dongle with usb/network/remote sharing and debugger tools Read more here 2022-02-09 Infinity Chinese Miracle-2 CM2MT2 v2.33 - New repair and service features As ordinary unique #CM2 functions and methods released Core Changed: Protocol updated (RAPHAEL/LEGACY) Changed: FireFly OverDA has been updated MemoryTool Changed: MemoryTool rebuild Changed: Activated "Restore Backup" with security only mode Changed: Activated "Open active folder" button Changed: Activated Init GPT from binary file Changed: RPMB operations optimized Changed: RPMB unificated type detection ( "swapable" types even on programmed RPMB ) Flasher Changed: Protocol updated (RAPHAEL) Changed: UltraFlash protocol updated Changed: Renamed "Check HW" to "Check Compatibility" - Now software check also compatibility between selected firmware and phone firmware sides - You will see a warning about any issues with incompatible combinations, which may lead to device/security damage - in case of enforced flashing can be used "Restore Backup" to recover security data (with enabled Security Only" option) Changed: Backup option during flashing enforced by default Service Changed: "Smart Reset" rebuild Changed: "Smart Reset Extra" rebuild - Smart Reset Extra updated: Improved Huawei Account reset ( "old types" and "modern types" supported ) - Smart Reset Extra updated: Improved Samsung support : Reset/Change KG Required mode can be changed in software Settings tab! - Factory Reset : FRP reset only option updated, now brand-indepedent ( If need reset FRP only, without Smart-ones ) - Factory Reset : FullFactory[1] and Factory[2] methods issues can be reset by other methods ( "No recovery command" issue ) - Factory Reset : Optimized latest firmwares-devices settings detection Changed: Identify operation improved Changed: Restore Backup option improved : ability to restore "security" only items instead of full range (by enabling "Security Only" checkbox) Other Changed: GUI changes : MemoryTool menu, Dialogs, GUI fixes on older OS types Changed: Many importnatn internal changes, bugfixes and improvements Changed: RPMB with "type3" supported - unique feature, see the power Dongle firmware version required: 0152 Read more here 2022-02-08 Infinix files at Infinity #CM2 support area X625B, X625C, X625D, X626, X626B, X627, X627V, X627W, X650, X650B, X650C, X650D How to upload files to support Read more here 2022-02-05 iTel files at Infinity #CM2 support IT1508, IT1508+, IT151, IT1516+, IT1520, IT1556, IT1556+, IT1655, IT1702, IT1703 Read more here 2022-02-01 Infinix files at Infinity #CM2 support area X609, X609B, X610B, X612, X612B, X620, X620B, X622, X623, X624, X624B Read more here 2022-01-19 Infinity #CM2 and [BEST] Pinout database v2.06 - boot keys - pinouts - test-points - hardware types - keyboard codes - other information 2022-01-18 Tecno files at Infinity #CM2 support B1, B1f, B1g, B1p, B1s, B2, BA2, BB2, BB4, BB4k, BC1, BC1s, BC2, BC2c Read more here 2022-01-15 Infinix files at Infinity #CM2 support area X572, X573, X600, X601, X602, X603, X604, X605, X606, X606B, X606C, X606D Read more here 2022-01-10 Infinix files at Infinity #CM2 support area X5516C, X551, X552, X553, X554, X555, X556, X557, X559, X571 2022-01-08 Tecno files at Infinity #CM2 support 7CS, 8H, A52Lite, A52SLite, A675, A6, A710, A9, AB7, AC8, AX8, AX8S 2022-01-06 iTel files at Infinity #CM2 support A611WP, ACE2, IT1406, T1407, IT1408, IT1409, IT1452, IT1503, IT1508 2022-01-06 iTel files at Infinity #CM2 support A45, A507LS, A509W, A52, A52B, A571L, A571LL, A571W, A611W 2022-01-04 iTel files at Infinity #CM2 support A31, A31-Plus, A32F, A40, A42-Plus, A43, A44, A44-Power, A44-Pro 2022-01-03 iTel files at Infinity #CM2 support A16, A16Plus, A16S, A20, A22, A23, A23A, A23F, A23S 2022-01-02 Infinix flash files at Infinity #CM2 support X522, X5511, X5514, X5515, X5515F, X5516, X5516B 2022-01-01 iTel flash files at Infinity #CM2 support A11, A12, A14, A14S, A15, A15R 2021-12-30 Infinix flash files at Infinity #CM2 support PR652B, PR652C, X507, X509, X510, X521, X522 2021-12-24 Infinity Chinese Miracle-2 CM2MT2 v2.32 - RPMB, more Repair & Service features As ordinary unique #CM2 functions and methods released Core Changed: FireFly loaders has been updated Changed: FireFly DA loaders has been updated Changed: RPMB operations activated - Read, Write, Erase - Supported SoC: MT6739, MT6761, MT6763, MT6765, MT6768, MT6771, MT6779, MT6781, MT6785, MT6799, MT6833, MT6853, MT6873, MT6877, MT6885, MT6893 - Fast: 1 | 2 minute for 16MB on eMMC and UFS on Read | Write & Erase - Easy and Safe: automatic backup at service cases, data verification MemoryTool Changed: MemoryTool rebuild Changed: Activated RPMB operations menu - Allow Read RPMB memory - Allow Write RPMB memory - Allow Wipe RPMB memory Service Changed: "SmartReset" rebuild - Smart Reset Extra updated: support Huawei Account reset: EMUI 9-10 - SmartReset in DataSafe mode check and warn about "fixed" devices, where data loss possible Changed: Identify operation improved Changed: Repair Security - Repair security now support VIVO devices - Repair case select automatic, not need select / choose / do anything extra. New Feature: ServiceReport: Allow read device-specific data and send to R&D team directly: Menu -> Extra -> Make ServiceReport This option helps to collect hardware database and improve device detection process. Other Changed: GUI changes : MemoryTool menu, Dialogs Changed: Many importnatn internal changes, bugfixes and improvements Dongle firmware version required: 0151 Read more here 2021-12-23 DTPro Tool Activation Codes available via Infinity Online Service DTPro Tool Activation Codes available via Infinity Online Service 2021-12-17 Infinity Pinout database v2.05 released Database contain: - boot keys - pinouts - test-points - hardware types - keyboard codes - other useful information NOTE: Installation path for this database is /pinout2/ and legacy database at /pinout/ can be deleted manually 2021-12-07 Infinity Chinese Miracle-2 CM2MT2 v2.31 - New features activated Core Changed: Activated FireFly over DA ! Support latest UFS-based SoC : MT6781, MT6785, MT6779, MT6833, MT6853, MT6873, MT6877, MT6891, MT6893 ! Support eMMC-based SoC : MT6739, MT6757, MT6761, MT6763, MT6765, MT6768, MT6771, MT6779, MT6797, MT8167 ! Supported operation : Generic MTK + Bootloader Unlock is available now for all latest SoC FireFly FireFly: NewSOC: MT6753 [Legacy] FireFly: Bootloader Unlock activated for LEGACY phones ! Support for now: MT6580, MT6737 ( tested and confirmed as working ) Current list of supported SoC: Legacy : MT6580, MT6735, MT6737, MT6753 Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771 !! EOL info and other HW stuff also shown for LEGACY !! On LEGACY devices in most cases UserData encryption can be not set. !! FireFly allow boot/read even for devices with dead DRAM - no need desolder eMMC for data recovery! Flasher Changed: UltraFlash engine updated Firmware Reader Changed: New types supported Changed: Internal Database updated Changed: Vivo, Oppo, Realme - firmware naming optimized - model, type, internal versioning etc. MemoryTool Changed: MemoryTool rebuild Changed: Activated "Make Backup" option Changed: Activated "Restore Backup" option Service Changed: "SmartReset" rebuild !Remove flyme account improved ( meizu ) !Reset FRP may fail on some devices, fixed !Improved work in FireFly mode !Improved compatibility with old Android(4 - 7) versions Changed: Security info reading improved Changed: Reset PrivacyLock activated under FireFly mode Changed: Backup ext_csd data during Identify under FireFly mode Changed: Bootloader Unlock rebuild (FireFly / Generic) Changed: Bootloader Unlock activated for more SoC : MT6757, MT6781, MT6785, MT6779, MT6797, MT6833, MT6853, MT6873, MT6877, MT6891, MT6893, MT8167 Changed: Bootloader Unlock activated for more SoC : MT6580, MT6737 Other Changed: Many internal changes and bugfixes Dongle firmware version required: 0151 Read more here 2021-12-07 iosFileUploader v1.14 released - file size detection bug fixed - minor UI changes Read more here 2021-12-03 Infinity Device & SoC database Device & SoC database now available right at Infinity main web page Read more here 2021-11-30 iosFileUploader v1.11 released - upload engine updated - config storage updated - minor UI changes Read more here 2021-11-26 Infinity Chinese Miracle-2 CM2MT2 v2.30 - More models & Features Core Changed: Protocol updated for Raphael / Legacy platforms Changed: FireFly / Infinity DA (Download Agents) updated FireFly FireFly: NewSOC: MT6580 [Legacy] Current list of supported SoC: Legacy : MT6580, MT6735, MT6737 Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771 !! EOL info and other HW stuff also shown for LEGACY !! On LEGACY devices in most cases UserData encryption can be not set !! FireFly allow boot/read devices even with dead DRAM - no need to desolder eMMC for data recovery! Flasher Changed: UltraFlash engine updated Firmware Reader Changed: New types supported Changed: Internal Database updated MemoryTool Changed: UltraFlash activated by default, no more any write restrictions Changed: Read/Write/Erase operations revised Service Changed: "SmartReset" updated for Legacy and old Raphael lines Changed: "SmartReset Extra" updated Changed: "SmartReset Data Safe" option activated Remove all APP and Security settings, retain userdata for Vivo, Oppo. It works for limited number of models at the moment, it depend on android version/build, use at own risk! Brand/model selection is not required, autodetection works Other Changed: Many different general changes and fixes applied Dongle firmware version required: 0151 Read more here 2021-11-23 Infinity Chinese Miracle-2 CM2MT2 v2.29 - MT6781, A/B Reader and more As ordinary, unique functions and methods released Core NewSOC : MT6781 supported - any security state - SLA, DAA, Plain Changed: Protocol updated for Raphael / Legacy platforms Changed: FireFly / Infinity DA (Download Agents) updated Agent : DA v2136 skipped, unstable FireFly FireFly: NewSOC: MT6735 [Legacy] FireFly: NewSOC: MT6737 [Legacy] Current list of supported SoC: Legacy : MT6737, MT6735 Raphael : MT6739, MT6761, MT6763, MT6765, MT6768, MT6771 !! EOL info and other HW stuff also shown for LEGACY !! In most cases on LEGACY devices UserData encryption can be not set. !! FireFly allow boot/read even devices with dead DRAM. No need to desolder eMMC for data recovery! Flasher Changed: UltraFlash engine updated Changed: Flash engine updated Firmware Reader Changed: A/B devices support activated! ! Android 10/11/12 with A/B slots processing is now supported ! Read FW is completely like factory one! ! Read FW is NOT damage anything on device! ( FOTA, A/B switch and other ) ! Read FW is NOT read "broken" slots = no any further issues! ! Read FW identify active/alive slots = always WORKING firmware, extremely reduse FW size ( for ABv1 ) Changed: Database rebuild. Branded : Support most of modern LG, Oppo, Samsung, Vivo, Infinix, Tecno and other brands. ! All this is completely safe and factory-like firmwares! Changed: Database rebuild. Unbranded : Many "noname" and small brands supported now as well. ! All this is completely safe and factory-like firmwares! Changed: New types supported Changed: Internal Database updated Changed: MT6781 support Service Changed: "SmartReset" updated for Android 10/11 devices. Changed: "SmartReset Extra" updated Changed: "Identify" operation now show more device info Changed: Restore Backup operation has been updated Changed: SPUnlock updated. Unsupported types reporting activated if user enable that option Other [+] About 200 different general changes and fixes applied to algorithms and methods [+] Software Update checker feature enabled Dongle firmware version required: 0151 Read more here 2021-10-29 Infinity Pinout database v2.04 released Information about boot keys, pinouts, test-points, hardware updated NOTE: pinout v2.04 will be installed to /pinout2/ folder by default, folder with legacy pinouts /pinout/ is also there 2021-10-23 Support area with flash files updated iTel firmware ready for download from Infinity support: W6003, W6004, W6004P, W6501, W6502, W6503, W7001, W7002, W7002P 2021-10-18 Support area with flash files updated iTel firmware ready for download from Infinity support: W5006X, W5008, W5503, W5504, W5505, W6001, W6002, W6002E 2021-10-09 Support area with flash files updated iTel firmware ready for download from Infinity support: W4002, W4003, W5001P, W5002, W5003, W5004, W5005, W5005P 2021-10-06 Support area with flash files updated iTel firmware ready for download from Infinity support: S21, S31, S32, S32-Lite, S33, S41, S42, SA7, W4001O, W4001P, W4001S 2021-09-25 Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.14 - A/B support and more As ordinary, unique functions and methods released Core Changed: FlashCore protocol updated - R25.x Changed: New DL-core support - v20 at Infinity notation Changed: Diag protocol updated Changed: 1S base loaders for SC7731e - AB devices, Android 10/11 Changed: 1S loaders line included for SC9832e - AB devices, Android 10/11 Changed: 1S loaders line included for SC9863 - AB devices, Android 10/11 Info: It's recommended to use 1S loaders for Identify operation on older UniSoc lines - SC7731e, SC9832e, SC9863 with Android 9 - 10 Changed: FlashLoader authentification [RSA and AES] - brand-specific operation - Allow service over FlashMode models, which require remote authentification - New model lines activated (server-side): Tecno, Infinix - Supproted Brand lines: Itel, Infinix, Tecno, Generic Flasher Changed: Protocol updated Changed: FlashCore update Changed: A/B flashing activated (Infinity Packages, factory PAC) Changed: PAC r2.x line support updated Changed: Infinity Packages flashing revised Service Changed: FormatFS updated Changed: NVMManager updated - NV Read, Write, Update Changed: RepairSecurity updated: SN repair Changed: RepairSecurity updated: ServerSupport models list increased, more Android 10/11 supported Firmware reader Changed: Android 10, 11 specific changes Changed: UltraRead protocol updated Changed: Loader compatibility selection optimized Changed: A/B devices support activated! - Allow read complete, working, safe and factory-like firmware images for most modern Android 10/11 devices! - No any FOTA, security and other issues with read FW, no any unique data damage - Automatic active slot identification and selection, with no chances to read useless firmware and also save 2x HDD space for old AB Model DB Changed: New generic loaders included for SC7731e - 1S line, v20 Changed: New generic loaders included for SC9832e - 1S line, v20 Changed: New generic loaders included for SC9863 0 1S line, v20 Changed: New generic loaders included for T618 - 1S line, v20 Changed: New loaders included for Realme Changed: New loaders included for Itel Changed: New loaders included for Tecno Changed: New loaders included for ZTE Other Changed: LoaderDB updater now supports modern PACs - A/B, modern R2.x Changed: Many other different changes and fixes Dongle firmware version required: 0150 Read more here 2021-09-24 Support area with flash files updated iTel firmware ready for download from Infinity support: P51, P861L, S11, S11+,S11-Pro, S11X, S11XB, S12, S13, S13-Pro 2021-09-19 Support area with flash files updated iTel firmware ready for download from Infinity support: ORA, P12, P13, P13+, P31, P32, P41 2021-09-18 Support area with flash files updated iTel firmware ready for download from Infinity support: IT6900, IT6910, IT9200, IT9300, L5002, L5002P, L5006, L5006C, L5006S, L5007 2021-09-13 Support area with flash files updated iTel firmware ready for download from Infinity support: IT6110, IT6110B, IT6120, IT6130, IT6131, IT6310, IT6331, IT6350 2021-09-11 Support area with flash files updated iTel firmware ready for download from Infinity support: IT5620, IT5621, IT5622, IT5625, IT5626, IT5630, IT5631 2021-09-08 Support area with flash files updated iTel firmware ready for download from Infinity support: IT5615, IT5615B, IT6516, IT5617, IT5618, IT5618N 2021-09-04 Support area with flash files updated iTel firmware ready for download from Infinity support: IT5603, IT5605N, IT5606, IT5606B, IT5608, IT5608B, IT5611, IT5613 2021-08-31 Support area with flash files updated Tecno firmware ready for download from Infinity support: WX3, WX3LITE, WX3P, WX4Pro, WX4ProS, Y2 2021-08-29 Support area with flash files updated iTel firmware ready for download from Infinity support: IT5620, IT5620N,IT5312, IT5320B, IT5330, IT5360, IT5600 2021-08-26 Infinity Chinese Miracle-2 CM2MT2 v2.28 - MT6877, MT6893, Repair Security and more As ordinary, unique functions and methods released Core Changed: Protocol updated for Raphael / Legacy platforms NewSOC: MT6877 supported - any security state - SLA, DAA, Plain NewSOC: MT6893 supported - any security state - SLA, DAA, Plain Changed: FireFly / Infinity DA (Download Agents) updated Changed: NVRAM manager has been rebuild from scratch For now it covers all Old and Modern devices for Identify and Repair operations in FlashMode! FireFly - Universal DA (Download Agent) that was created by Infinity Team to reach new service level and gives features FireFly: NewSOC: MT6739 FireFly: NewSOC: MT6761 FireFly: NewSOC: MT6763 FireFly: New operations supported: Repair Security for Generic, Vivo and all other non-signed cases Read / Write NVRAM Restore Backup Current list of supported SoC: MT6739 MT6761 MT6763 MT6765 MT6768 MT6771 Supported operations: Identify: Device Info ( Android ), HWInfo with Full eMMC and EOL info Format FS: Smart Reset, Extra and all other mode are supported MemoryTool: Allow execute ALL supported MemoryTool functions BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData Repair Security for Generic, Vivo and all other non-signed cases Read / Write NVRAM Restore Backup Flasher Changed: UltraFlash engine updated and also any limitations has been removed Changed: Flash engine updated Firmware Reader Changed: New types supported Changed: Internal Database updated Changed: MT6877 support Changed: MT6893 support Changed: Fake "Samsung" devices processing fixed Service Changed: "SmartReset" updated Changed: "SmartReset Extra" updated Changed: "Identify" operation now show more security info Changed: "Identify" operation now show modem info/version Changed: New NVRAM engine/tools ! Read device security now works with Legacy (Old/New) and Raphael (Old/New) lines ! Rebuild check/verify procedures for modern devices ! Repair Security now works in flash mode for Raphael line too ( support most UNSIGNED types - Generic, Huawei, Vivo, Nokia etc. ) ! Repair security NOT work with vendor-signed devices ( you will get info about device not supported during operation ) ! Signed/Generic mode detection improved Changed: Restore Backup operation has been updated Changed: NVRAM read and write operations has been updated Memorytool Changed: FireFly mode support updated Other Changed: Many different general changes and fixes applied Feature: Feedback - BugReporting/DebugData collection module enabled. Feedback can be enabled/disabled during installation. ! Feedback feature made for fast, automatic reporting to team about new/unsupported devices in different operations without any additional need of actions from user side. ! That will allow bring server-side updates faster and make updates for new and unsupported phones, if need, every day! Dongle firmware version required: 0150 Read more here 2021-08-21 Infinity Pinout database v2.02 released Information about boot keys, pinouts, test-points, hardware updated NOTE: pinout v2.02 will be installed to /pinout2/ folder by default, folder with legacy pinouts /pinout/ is also there and not deleted 2021-08-19 Support area with flash files updated Tecno firmware ready for download from Infinity support: W1, W2, W3LTE, W4, W5, W5Lite, TR109V, WP2 2021-08-17 Support area with flash files updated iTel firmware ready for download from Infinity support: IT5090, IT5090B, IT5091, IT5092 IT5231, IT5231B, IT5250, IT5250B 2021-08-16 Support area with flash files updated Tecno firmware ready for download from Infinity support: T485, T528, T529, T631, T632S, T661, T662, T901, T920D 2021-08-09 Support area with flash files updated iTel firmware ready for download from Infinity support: IT5030, IT5040, IT5040B, IT5070, IT5071, IT5080, IT5080B, IT5081 2021-07-31 Support area with flash files updated Tecno firmware ready for download from Infinity support: T432, T453, T454, T466, T473, T474, T484 2021-07-24 Support area with flash files updated iTel firmware ready for download from Infinity support: IT5020, IT5021, IT5022, IT5025, IT5026 2021-07-23 Infinity YouTube channel update Please visit updated Infinity YouTube Channel 2021-07-19 Infinity Chinese Miracle-2 CM2MT2 v2.27 - MT6853, MT6853, Samsung, FireFly and more As ordinary, unique functions and methods released Core Changed: Protocol updated ( Raphael ) NewSOC : MT6833 support activated ( any security state ) NewSOC : MT6853 support activated ( any security state ) Changed: MT68xx line support optimized ( FireFly:EMI, EMI Engine, UltraFlash ) Auth AUTH: MT6833 with any security configuration supported standalone! AUTH: MT6853 with any security configuration supported standalone! Core: Protocol: FireFly updated FireFly - Universal DownloadAgent that was created by Infinity Team to reach new service level and provide advanced features New SoC activated: MT6768 MT6771 Current Supported SoC: MT6765 ( any security configuration ) MT6768 ( any security configuration ) MT6771 ( any security configuration ) Support operations: Identify: Device Info (Android), HWInfo with Full eMMC and EOL info Format FS: Smart Reset, Extra and all other modes are supported MemoryTool: Allow execute ALL supported MemoryTool functions ! Read, Write (Binary, Sparse, Signed, Unsigned), Make FileSystems, Wipe, extra features ! Unlike MTK mode FireFly IS NOT rely on DA/Device security policy so there is no limits for different operations (No any Write / Erase issues) BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData Changed : BootLoader unlock : ability to re-lock bootloader - software will ask if device already unlocked for re-lock it back Flasher Changed: UltraFlash engine updated Changed: Samsung flashing support activated ( MTK models , only CM2 firmware! ) Changed: MT68xx line specific changes Firmware Reader Changed: New types supported Changed: Internal Database updated Changed: SAMSUNG devices line support activated! ! Allow read COMPLETE, SAFE, USABLE firmware. No any security damage, no any additional reflashing after required Changed: MT68xx line specific changes Changed: Android 9-10-11 DevInfo optimized Changed: Firmware naming optimized Changed: Vendor Specific : OPPO devices support optimized for read firmware Changed: Vendor Specific : VIVO devices support optimized for read firmware Service Changed: "SmartReset" updated Changed: "SmartReset" now activated for LEGACY line devices ! Device range : From MT6572 and up to 6737 ! Tested SoC/Devices : MT6572, MT6592, MT6595, MT6735, MT6737, MT6752, MT6753, MT8127, MT8172, MT6580 ! Tested Android version : 4.4, 5.x, 6.x, 7.x, 8.x, 9.x, 10.x ! Info : Due to wide range of LEGACY devices some of them may work not correct so, please, leave us reports about issues! Changed: Identify operation now read more device info ( Android 10/11 ) MemoryTool Changed: Init GPT updated ( Normal / Resize mode ) Changed: Extra operations updated Changed: Operations in FireFly mode updated Other Changed: Many different internal changes and fixes applied Dongle firmware version required: 0150 Read more here 2021-07-17 Support area with flash files updated Tecno firmware ready for download from Infinity support: T372, T384, T401, T402, T409, T432 2021-07-16 Support area with flash files updated iTel firmware ready for download from Infinity support: IT2310, IT2320, IT2320B. IT2570, IT2590, IT4510, IT5010 2021-07-16 Infinity DongleManager v1.86 released - Report & Fix procedure improved - Report & Fix suggested according to Smart-Card state 2021-07-11 Infinity Chinese Miracle-2 CM2MT2 v2.26 - New Core, BootLoader Unlock and more As ordinary, unique functions and methods released Core Changed: Protocol updated (Raphael / Legacy) Changed: MT6785 support fixed Changed: MT6885 support fixed Core: Protocol: FireFly activated FireFly - Universal DownloadAgent that was created by Infinity Team to reach new service level and provide advanced features Current Supported SoC (initial release): MT6765 Support operations: Identify: Device Info (Android), HWInfo with Full eMMC and EOL info Format FS: Smart Reset, Extra and all other modes are supported MemoryTool: Allow execute ALL supported MemoryTool functions ! Read, Write (Binary, Sparse, Signed, Unsigned), Make FileSystems, Wipe, extra features ! Unlike MTK mode FireFly IS NOT rely on DA/Device security policy so there is no limits for different operations (No any Write / Erase issues) BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData ! Bootloader unlock also allow unlock Brand-Specific cases (Xiaomi supported at the moment) Changed : UniversalBoot : BootHelper ! Software always try to init BootRom mode if it's required for selected target ! Software allow force BootRom mode for generic models (plain one) if it's required ! In current release 4 different ways activated which cover most of cases but may not work with some cases, more to come Flasher Changed: UltraFlash engine updated Firmware Reader Changed: New types supported Changed: Internal Database updated Changed: Huawei line changes and fixes Service Changed: HWReport improved Changed: "SmartReset" updated Changed: "SmartReset Extra" updated ! Vendor-specific mode improved for Samsung devices (A4x and others) ! Device brands supported in EXTRA mode: Vivo, Meizu, Xiaomi, Samsung Changed: Identify operation now save preloader backup Changed: Identify opertaion now show OTP info for Alcatel-like and similar devices NewFeature : BootLoader Unlock Activated ( No data Loss ) Changed: Full MemoryInfo (include CSD, WP status, EOL info etc.) now shown in FireFly mode by default Memorytool Changed: Preloader Init has been rebuild - Raphael, Legacy, FireFly Changed: Automatic selection rules updated Changed: Extra operations updated Changed: FileSystem build revised Changed: FireFly as core protocol supported in MemoryTool Other Changed: Many different general changes and fixes applied Changed: Protocol/SoC Generation switch can be done over "Platform" in System Menu ! According to Platform/Protocol selection some features may enabled or disabled - make right Platform selection before operation! Dongle firmware version required: 0150 Read more here 2021-07-10 Support area with flash files updated Tecno firmware ready for download from Infinity support: T301, T311S, T349, T349D, T350, T351 2021-07-09 Support area with flash files updated iTel firmware ready for download from Infinity support: IT2182, IT2190, IT2190S, IT2191, IT2191B, IT2192, IT2192T 2021-07-03 Support area with flash files updated Tecno firmware ready for download from Infinity support: SA1, SA1S-Pro, SA3, SA6, SC7S, T101, T201, T203S 2021-07-01 Infinity DongleManager v1.83 released - Important internal changes - Report & Fix option released - GUI changes 2021-06-27 Infinity Chinese Miracle-2 CM2SP2 SPD-UniSoc v2.13 - Boot RSA Auth activated As ordinary, unique functions and methods released Core Changed: FlashCore protocol updated Changed: Automatic detection and use loaders with PMTInfo Changed: FlashLoader authentification [RSA and AES] activated ( brand-specific ) - Allow service over FlashMode models, which require remote authentification - Supproted Brand lines: Itel - all RSA-auth enabled models - Supported default prod auth - Generic models, RSA and AES - After sucessfull auth you have full access to any service operations - flash read, write, frp, repair - Feature require Internet access and valid IOS username and password - Feature is free and unlimited for all currently supported models Flasher Changed: Protocol updated Firmware reader Changed: New range of generic and brand-specific models support for safe and complete Firmware Read Changed: NAND support revised Model DB Changed: Moto G20 (XT-2821-X line) included in list (support under test) Other Changed: Some changes and fixes Dongle firmware version required: 0150 Read more here 2021-06-25 Support area with flash files updated iTel firmware ready for download from Infinity support: IT2172, IT2173, IT2173B, IT2180, IT2180B 2021-06-23 Support area with flash files updated Infinix firmware ready for download from Infinity support: X658B, X659, X659B, X660, X660B, X660C, X680, X680B, X680C, X680D, X680E, X680F 2021-06-21 Support area with flash files updated Tecno firmware ready for download from Infinity support: RA6, RA6S, RA7, RB6S, RB7S, RB8S, RC6, S6, S6S 2021-06-20 Support area with flash files updated iTel firmware ready for download from Infinity support: IT2163, IT2163D, IT2163R, IT2170, IT2171, IT2171B, IT2171S 2021-06-17 Infinity Chinese Miracle-2 CM2MT2 v2.25 - MT68xx line, new models and features As ordinary, unique functions and methods released Core Changed: Protocol updated (Raphael/Legacy) NewSoC : MT6873 support activated NewSoC : MT6885 support activated (under test) Changed: BootHelper : core updated Changed: FireFly : EMI updated Changed: MT817x line support improved Changed: Boot : HWinfo parsing improved Changed : UniversalBoot : EMI Engine ! Selection rules updated ! By default during Flashing used FW as source ! EMI collecting speed optimized, now more faster on auth-enabled devices ! BootHelper <> FireFly interaction optimized NewSoC : MT6873 supported features ! Standalone SLA : supported ! FireFly : EMI : supported ! META operations : supported ! Firmware Read : supported ! Firmware Write : supported ! Reset Settings : supported ! Reset FRP : supported ! Misc Operations : supported Flasher Changed: UltraFlash engine updated ! Tuned up for multi-failed regions ( like Huawei ) Changed: Default FlashSettings updated Firmware Reader Changed: Huawei support activated! ! Allow read CORRECT firmware but not a useless/harmful dump etc. ! Sparsing for Huawei-specific partitions activated - extremely reduce FW size Changed: New types supported Changed: Internal Database updated Changed: Activated sparsing (reduce firmware size and increase flashing speed) for: ! - F2FS ! - HuaweiFS Changed: MT6873 specific changes ( new formats and types ) - Allow read CORRECT firmware without damage FOTA/OTA, Security etc. - Final result Firmware is like factory one Changed: MT6885 specific changes ( new formats and types ) - Allow read CORRECT firmware without damage FOTA/OTA, Security etc. - Final result Firmware is like factory one Service Changed: META protocol updated ! Support MT68xx line ! Legacy bugfixes Changed: HWReport improved (MT68xx line support) Changed: "SmartReset" updated Changed: "SmartReset Extra" updated ! Vendor-specific mode activated for SAMSUNG phones ! Device brands, supported in EXTRA mode: Vivo, Meizu, Xiaomi, Samsung Other Changed: Many different general changes and fixes applied Dongle firmware version required: 0150 Read more here 2021-06-16 Support area with flash files updated Infinix firmware ready for download from Infinity support: X658B, X659, X659B, X660, X660B, X660C, X680, X680B, X680C, X680D, X680E, X680F 2021-06-15 Support area with flash files updated Tecno firmware ready for download from Infinity support: N2, N5S, P701, P702AS, P703, P904, PP7E, PP7E-Pro, R6S 2021-06-14 Support area with flash files updated iTel firmware ready for download from Infinity support: IT2132, IT2150, IT2160, IT2160S, IT2161, IT2161R, IT2162 2021-06-12 Support area with flash files updated Infinix firmware ready for download from Infinity support: X653, X653C, X655, X655C, X655D, X655F, X656, X657, X657B, X657C 2021-06-07 Infinity Chinese Miracle-2 CM2SP2 SPD-UniSoc v2.12 - New repair level activated As ordinary, unique functions and methods released Core Changed: FlashCore protocol updated (R25) Changed: New DL-core support (v10 at Infinity notation) NewSOC: SC9820e [RS/0S] with NAND supported Changed: Diag protocol updated Flasher Changed: Protocol updated Changed: FlashCore rebuild - Reworked FlashErase - Reworked support of fully erased or semi-damaged modern devices Android 8/9/10/11 (SC9820e, SC7731e, SC9832e, SC9863, SC9850), it is possible to repair these devices from any state (in case of working HW) - Reworked NVRecovery procedure - Android version change ( Downgrade/Upgrade ) now work more correct Firmware reader Changed: Android 10 specific changes Changed: KaiOs specific changes Changed: Initial Android 11 support Changed: UltraRead protocol updated Changed: Fixed "Encryption Unsucessfull" errors on some devices after flash SPUnlock Changed: Android 11 SPunlock and Repair confirmed and working Changed: UniSoc Tiger T310 initial SPUnlock/Repair support Changed: Changed unlock procedure for some devices Changed: Allow check status/continue unlock on zero balance Almost all existing on market devices for SP-Unlock and Repair are supported, Android 10 / 11 "security" as well Model DB Changed: New generic loaders included for 9820E with NAND Other Changed: Many other different changes and fixes Dongle firmware version required: 0149 Read more here 2021-06-05 Support area with flash files updated Tecno firmware ready for download from Infinity support: LB8, LC6, LC6a, LC7, LC7S, LC8, LD7, LD7j 2021-06-04 Support area with flash files updated iTel firmware ready for download from Infinity support: IT2090, IT2100, IT2100S, IT2110, IT2120, IT2123, IT2123V, IT2130B 2021-06-03 Support area with flash files updated Infinix firmware ready for download from Infinity support: X627, X627V, X627W, X650, X650B, X650C, X650D, X652, X652A, X652B, X652C 2021-06-02 Online model selector updated Please TRY and give your advice 2021-06-02 Support area with flash files updated Tecno firmware ready for download from Infinity support: L9, L9+, LA6, LA7, LA7-Pro, LB6, LB7, LB8, LB8a 2021-06-01 Support area with flash files updated Infinix firmware ready for download from Infinity support: X623, X624, X624B, X625B, X625C, X625D, X626, X626B 2021-05-29 Support area with flash files updated iTel firmware ready for download from Infinity support: IT1516+, IT1520, IT1556, IT1556+, IT1655, IT1702, IT1703, IT2050V 2021-05-25 Infinity Chinese Miracle-2 CM2MT2 v2.24 - UniversalBoot and other features As ordinary, unique functions and methods released Core Changed: Protocol updated ( Raphael/Legacy ) Changed: BootHelper updated Changed: MT8172/MT8173 support improved Changed: MT6580/MT6752 support improved Changed: MT6735/MT6737/MT6753 support improved NewFeature UniversalBoot: EMI Engine ! Allow boot device without need of preloader or whatever else, all settings got from device ! Feature support generic and secure devices as well from MT6580 up to MT6799 , MT81xx line also supported ! Some device may NOT work : Fully ERASED or RE-MARKED CID ! Feature ovveride default EMIDB , from Firmware and BootHelper ! Disable/Enable : Settings -> FireFly : AutoEMI ( Enabled by Default ) NewFeature UniversalBoot: AutoDA select ! At wrong base DA selection software will automatically change DA base for connected device ! Feature will select most correct, well tested and usable DA for target ! Must be installed complete bootPackage ( before v2.21 ) for correct work! !With UniversalBoot feature work with most devices will reduce just to operation select and device connecting ( BROM mode prefered ) !No other optional steps required Flasher Changed: UltraFlash engine updated Changed: Legacy FlashCore rebuild ! Optimized for modern/old DA versions and different targets on OLD CHIPs ! Use of latest version for service LEGACY lines is strongly recommended Changed: Default FlashSettings updated MemoryTool Changed: "Init GPT/PMT with resize" feature improved Service Changed: "SmartReset" updated Changed: "SmartReset Extra" updated Firmware Reader Changed: New types supported Changed: Internal Database updated Other Changed: Some general changes and fixes Dongle firmware version required: 0148 Read more here 2021-05-24 Support area with flash files updated Tecno firmware ready for download from Infinity support: KF6, KF6h, KF6i, KF6j, KF6k, KF8, L8, L8-Lite 2021-05-19 Support area with flash files updated Infinix firmware ready for download from Infinity support: X606, X606B, X606C, X606D, X610B, X612B, X620, X620B, X622 Read more here 2021-05-17 Support area with flash files updated iTel firmware ready for download from Infinity support: IT1408, IT1409, IT1452, IT1503, IT1508, IT1513 Read more here 2021-05-14 Support area with flash files updated Tecno firmware ready for download from Infinity support: KE5, KE5j, KE5k, KE6, KE6j, KE7 Read more here 2021-05-13 Support area with flash files updated Infinix firmware ready for download from Infinity support: X600, X601, X602, X603, X604, X605 Read more here 2021-05-11 Support area with flash files updated iTel firmware ready for download from Infinity support: A51, A52, A52B, A571L, A571LL, A571W, IT1406, IT1407 Read more here 2021-05-10 Support area with flash files updated Tecno firmware ready for download from Infinity support: KC8, KC8S, KD6a, KD6, KD7, KD7S Read more here 2021-05-09 Support area with flash files updated Infinix firmware ready for download from Infinity support: X571, X572, X573 Read more here 2021-05-08 Support area with flash files updated iTel firmware ready for download from Infinity support: A31, A31+, A32F, A42+, A43, A44, A44Power, A44Pro, A45 Read more here 2021-05-07 Support area with flash files updated Tecno firmware ready for download from Infinity support: IN5, KC1j, KC2, KC2j, KC3, KC6 Read more here 2021-05-05 Infinity Chinese Miracle-2 CM2MT2 v2.23 - New models and features As ordinary, unique functions and methods released Core Changed: Protocol updated ( Raphael/Legacy ) NewSOC: ChipConfig for MT6833 activated ( under test ) Changed: BootHelper updated Changed: Fixed SW reaction to conenction/power issues ( lags/stuck removed ) Changed: META core updated ! Allow connect from now to device, which already in META mode ! Identify by default not reboot device, other operations - reboot Changed: Fixed Preloader mode handling on some driver versions Changed: Fixed META init on some devices Changed: SLA: Development feature to generate and send error reports automatically for unsupported devices ! No any data will be sent without user request Flasher Changed: UltraFlash engine updated MemoryTool Feature: Activated "Init GPT/PMT with resize" option ! Allow in some cases fix: Stuck/freeze/Rebooting issues on cheap encryption-enabled devices with cheap memory installed ! Issue found on MiPlay, some Infinix and other devices ( should work on more models range ) ! Feature work by decrease UserData space size to avoid "bad blocks" Service Changed: SmartReset updated Changed: SmartReset Extra mode updated ! SmartReset Extra acts like ordinary ones, but make additional, brand-required operations : - Reset MiAcc for XIAOMI ( non-permanent ) - Reset FlyMe acc for MEIZU - Reset DEMO mode on VIVO devices ( under test ) ! Other, vendor-specific scripts can be included by users requests Changed: "Restore Backup" option updated ! Clean and prepare files for correct restore in secure devices revised Firmware Reader Changed: New types supported Changed: Internal Database updated Other Changed: Some general changes and fixes Changed: Connection mode fixes Dongle firmware version required: 0148 Read more here 2021-05-04 Support area with flash files updated Infinix firmware ready for download from Infinity support: X555, X556, X557, X559 Read more here 2021-05-03 Support area with flash files updated iTel firmware ready for download from Infinity support: A20, A22, A23, A23A, A23F, A23S Read more here 2021-05-02 Support area with flash files updated Tecno firmware ready for download from Infinity support: ID5a, ID5b, IN1, IN1-Pro, IN2, IN3 Read more here 2021-05-01 Support area with flash files updated Infinix firmware ready for download from Infinity support: X5516C, X5516, X551, X553, X554, X555 Read more here 2021-04-30 Support area with flash files updated iTel firmware ready for download from Infinity support: A15R, A15, A16+, A16, A16S Read more here 2021-04-28 Infinity Chinese Miracle-2 CM2MT2 v2.22 - New models and features As ordinary, unique functions and methods released Core Changed: Protocol updated (for Raphael/Legacy SoC) Changed: Loader v2112 supported and tested Changed: MediaTek MT6757 support revised Changed: StandAlone SLA now activated in automatic mode for phones that need it Changed: Driver dependency is not important any more, it gives more flexibility and more stable operations Changed: EMI DB updated, BootHelper updated NewChip:: MT3561/MT3561S supported (CardHeadUnit) Flasher Changed: Core updated for RAPHAEL SoC line Changed: UltraFlash engine updated MemoryTool Changed: Long-range reading (over 32+ GB) optimized ( in most cases for Forensic cases ) Changed: LEGACY support revised Service Changed: SmartReset function process updated Changed: New SmartReset mode activated - SmartReset Extra ! SmartReset Extra acts like ordinary ones but makes additional operations for specific brands: - Reset MiAcc for Xiaomi ( non-permanent ) - Reset FlyMe acc for Meizu ! Other vendor-specific scripts can be included by users requests Feature: "Restore Backup" option activated ( see Security tab ) ! Automatic restore backup for connected device if this backup was already created earlier by Identify, Settings -> Autobackup option Firmware Reader Changed: Android 11 specific changes Changed: Brand-specific changes and fixes Changed: Better sparse handling Changed: New types supported Changed: Internal Database updated Model DB Changed: Changed acting model to semi-auto ! In most cases it is enough just to select required operation and connect devices ( BROM mode preferable ) ! In some situations it may need to select older BASE DA for older SoCs ( LEGACY ones, since they are outdated ) Changed: New DA base v2112 included Other Changed: Number of small changes and fixes Changed: Some unused options and checkboxes has been removed as deprecated, UI become easier Here is virustotal report for people who care about safety. Be sure you do not use low quality antivirus tools - first 6 lines in given list gives false alert! Dongle firmware version required: 0148 Read more here 2021-04-28 Support area with flash files updated Tecno firmware ready for download from Infinity support: F3Pro, F4, F4Pro, i3, i3Pro, i5Pro, i7, IA5 Read more here 2021-04-27 Support area with flash files updated Infinix firmware ready for download from Infinity support: X522, X5511, X5514, X5515, X5515F, X5515I, X5516B Read more here 2021-04-26 Support area with flash files updated iTel firmware ready for download from Infinity support: A11, A12, A14, A14S Read more here 2021-04-25 Support area with flash files updated Tecno firmware ready for download from Infinity support: A675, A6, DP8D, F2LTE Read more here 2021-04-24 Support area with flash files updated Infinix firmware ready for download from Infinity support: X5010, X507, X509, X510, X521, X522 Read more here 2021-04-20 Infinity Dongle [Smart-Card] upgrade server got new features - Advanced error check and recovery methods implemented - Automatic Smart-Card recovery after lost Internet connection - New Smart-Card types are supported - Infinity DongleManager v1.81 (or higher) is required - Updated Smart-Card firmware for renewed dongles released Read more here 2021-04-06 Sony direct unlock/counter 0 reset comes back Sony direct unlock/counter 0 reset (any model) qUnlockTool is back 2021-03-17 SL3 service comes back SL3 service comes back with new price, check price before make an order 2021-03-01 Infinity Pinout database v2.01 released Information about boot keys, pinouts, test-points, hardware updated NOTE: pinout v2.01 will be installed to /pinout2/ folder by default, folder with legacy pinouts /pinout/ is also there and not deleted Read more here 2021-02-18 SL3 servcie delay There is a some kind of unpredictable delay with SL3 service. We are trying to solve it with all our efforts. If your SL3 orders become delayed and you can not wait any more please contact to support for refund. Default quoted time for new orders is 7 (seven) days ! Thank you for your kind understanding ! Read more here 2021-02-15 Smart-Card managemen engine become revised Smart-Card management engine has been adjusted, OS firmware code optimization was finished and finally whole system become ready for new features. To improve whole system stability and to free Smart-Card memory for new features some kind of legacy code will be removed from Smart-Card OS and previously released free test versions (several year old) will be removed step-by-step. For end users it will be no any visible changes, the only exceptions are: - Smart-Card update process will be little bit faster due to firmware code optimization - Legacy free test software versions will be unavailable. As a replacement for legacy free test versions you can consider to order paid one anytime Currently NO ACTION by users are required ! New features will be applied automatically as a part of regular Smart-Card update Please DO NOT update Smart-Card until you will see explicit message that firmware should be updated 2021-02-10 Infinity Chinese Miracle-2 CM2SP2 SPD-UniSoc v2.11 - Unlock, Repair, New CPU As ordinary, unique functions and methods released Core Changed: FlashCore protocol updated NewSOC: UMS9117 support ( service mode ) Flasher Changed: Protocol updated Changed: NVM manager updated Firmware reader Changed: Android 10 specific changes Changed: UltraRead protocol updated Changed: New types supported Service Changed: Repair : Security Repair allow now repair signed devices - Permanent lock and other issues can be also fixed with that feature - Repair can be done in Flash and Diag mode - Repair support new security devices as well ( Android 10 + ) Changed: Repair : UMS9117 repair security support activated ( Nokia line supported included ) Changed: Identify : Enabled Read All Info by default under FlashMode Changed: FormatFS : UMS9117 Reset/Format FS support activated SPUnlock Changed: UMS9117 support activated ( Nokia line supported included ) Changed: SC9863, SC9832 support improved Other Changed: Many internal changes and fixes Drivers: UMS9117 drivers are at support area Dongle firmware version required: 0147 Read more here 2021-02-02 Infinity Chinese Miracle-2 CM2MT2 v2.21 - MT67xx and MT81xx ON ! As ordinary, unique functions and methods released With this update we finishing following achievements: Complete MT67xx line support ! Complete MT81xx line support ! Core: Changed: Protocol updated ( Raphael/Legacy ) AUTH: MT6779 with any security configuration supported standalone ! AUTH: MT6799 with any security configuration supported standalone ! AUTH: MT8127 with any security configuration supported standalone ! AUTH: MT8167 with any security configuration supported standalone ! AUTH: MT8172 with any security configuration supported standalone ! AUTH: MT8173 with any security configuration supported standalone ! Changed: BootHelper updated - Automatic Self-Learning function improved Changed: EMI manager updated, most modern devices support has been included Flasher: Changed: Core updated for RAPHAEL line Firmware Reader: Changed: New types supported Changed: Internal Database updated ModelDB: Changed: Some specific and brand list update Other: Changed: Different changes and fixes Installer: [*] Installer become more compact and now contain two parts: required and optional [*] Optional Installer CM2MT2-boot-pack contain optional (legacy) boot files Dongle firmware version required: 0147 Read more here 2021-01-29 Infinity Chinese Miracle-2 CM2MT2 v2.20 - Standalone MTK auth ON - NEW CPU As ordinary, unique functions and methods released Core: Changed: Protocol updated ( Raphael/Legacy ) AUTH: MT6752 with any security configuration supported standalone ! AUTH: MT6753 with any security configuration supported standalone ! AUTH: MT6768 with any security configuration supported standalone ! AUTH: MT6757 support improved/fixed Service: Changed: Identify procedure revised - Support modern Android 10 devices - Support for Android 11 devices activated Changed: SmartReset procedure - Support modern Android 10 devices - Support for Android 11 devices activated Firmware Reader: Changed: Android 10 specific changes for modern devices Changed: Android 11 initial support Changed: New types supported Changed: Internal Database updated ModelDB: Changed: Some specific and brand list update Other: Changed: Many different changes and fixes Dongle firmware version required: 0147 Read more here 2021-01-28 Infinity Chinese Miracle-2 CM2MT2 v2.19 - Standalone MTK auth ON - NEW CPU As ordinary, unique functions and methods released Core: Changed: Protocol updated ( Raphael/Legacy ) AUTH: MT6580 with any security configuration supported standalone ! AUTH: MT6735 with any security configuration supported standalone ! AUTH: MT6737 with any security configuration supported standalone ! AUTH: MT6731 with any security configuration supported standalone ! AUTH: MT6739 with any security configuration supported standalone ! AUTH: MT6750 with any security configuration supported standalone ! AUTH: MT6755 with any security configuration supported standalone ! AUTH: MT6757 with any security configuration supported standalone ! AUTH: MT6761 with any security configuration supported standalone ! AUTH: MT6762 with any security configuration supported standalone ! AUTH: MT6763 with any security configuration supported standalone ! AUTH: MT6765 with any security configuration supported standalone ! AUTH: MT6771 with any security configuration supported standalone ! AUTH: MT6785 with any security configuration supported standalone ! AUTH: MT6795 with any security configuration supported standalone ! AUTH: MT6797 with any security configuration supported standalone ! AUTH: MT8163 with any security configuration supported standalone ! Changed: BootHelper package updated - Automatic Self-Learning function activated - Do not need to make HWreport anymore before other operations in most cases ! Service: Changed: META core updated Changed: Security repair features rebuild. Bugfixes. Firmware Reader: Changed: Some modern brand-specific changes (Vivo, Meizu) Changed: New types supported Changed: Internal Database updated Other: Changed: Many different changes and fixes Info: Alternative MTK drivers package uploaded to support are, intstall it if you have any kind of connectivity issues Dongle firmware version required: 0147 Read more here 2021-01-27 MTK drivers package v2.0.1.1 New MTK drivers package Drivers_MTK_v2.0.1.1.7z uploaded to support area. Download from support area /software/drivers/ folder 2021-01-26 Infinity Chinese Miracle-2 MTK/MediaTek v2.18 - Standalone MTK auth ON - new models and features As ordinary, unique functions and methods released Core Changed: Protocol updated ( Raphael/Legacy ) Changed: Loader v2044 supported and tested ( v2028 was unstable with MT6765 ) NewChip: MediaTek AC8227 (Car HeadUnits SoC) supported NewChip: MediaTek AC8257 (Car HeadUnits SoC) supported Flasher Changed: Core updated for RAPHAEL line Service Changed: META core updated Changed: HW Report ( RAPHAEL - only ) - LifeStatus identify revised, in some cases it may shown wrong info. Strongly recommend use latest version for HWcheck ! !* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices (DRAM init) !* HWreport not require complete boot in case of semi-dead devices, it is useful for HWdebug !* HWreport result may vary in diffirent models and agents even on the same SoC ! Firmware Reader Changed: Some modern brand-specific changes (Oppo, Realme) Changed: New types supported Changed: Internal Database updated Model DB Changed: New agents included for Tecno, Infinix ( with different SoC lines ) Changed: New DA base v2044 included Other Changed: GUI settings now stored and load select style, settings and other at next run Changed: Environment compatibility issue with 32 bit OS has been fixed Changed: Many different changes and fixes Dongle firmware version required: 0147 Read more here 2021-01-23 Infinity Chinese Miracle-2 MTK/MediaTek v2.17 - Standalone MT67xx auth ON As ordinary, unique functions and methods released Core Changed : Protocol updated ( Raphael/Legacy ) NewFeature: Standalone SLA/Auth [Raphael] ** Changed : Internal EMI engine updated : RAPAHEL : UFS support rebuild Flasher Changed: Core updated for RAPHAEL line Changed: UltraFlash feature updated, new security workarounds supported Service Changed: Identify !* Read new Android 10 specific fields, vendor-specific fields Changed: Smart Reset !* Optimized support for different customized and generic cases Changed: HW Report ( RAPHAEL - only ) !* UFS line devices now supported with following features: - CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons - LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels - RPMB info ( is it key programmed or clean and can be re-used ) - Partitioning details and other - HWreport log saving enabled ( for further analyze ) !* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init ) !* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug !* HWreport result may vary in diffirent models and agents even on the same SoC ! Firmware Reader Changed : Some modern brand-specific changes ( Xiaomi, Oppo, Vivo, Realme ) Changed : New types supported Other BugFix : Many different minor changes and fixes Changed : Generic protocol rebuild Info !** - Standalone SLA/Auth allow you ignore device security setting and allow boot it without having any DA/Auth/Remote auth support - You can boot ( with supported SoC ) device with any generic da and perform any need operations - Support MT6765 - All security versions, no auth need, no special da need, no remote service need Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing - Support MT6785 - All security versions, no auth need, no special da need, no remote service need Support Xiaomi, Oppo, Vivo, Realme, Huawei and whatever else existing NOTE 1: special boot-helper tool should be installed - included in CM2MT2 package NOTE 2: x64 OS should be used Dongle firmware version required: 0147 Read more here 2021-01-19 Infinity Data Explorer v1.11 - MTK, SPD updated and more improvements Data extraction based on full reconstruction of file system - MTK module updated - added Call List extraction for some models - SPD firmware structure detection improved, important algos and methods updated - Minor bugs fixed Dongle firmware version required: 0100 Read more here 2021-01-19 AMT-Dongle Team notification - software activation price changes AMT-Dongle special offer (discount price) for software activations is closed, price is back to initial value Read more here 2021-01-17 Server side improvements CM2SP2 server [SPD] procedures will be under improvements in nearest days. If you will see something new in software functionality please read software messages carefully and report any found issues. 2021-01-02 Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.10 - New year means new features ! As ordinary, unique functions and methods released Core Changed : FlashCore protocol updated NewSOC: UniSOC Tiger T61x series support NewSOC: UniSOC UIS7862 (Car HeadUnits SoC) series support NewSOC: SC7731E Android 10 / FastProto supported NewSOC: SC9832E Android 10 / FastProto supported Flasher Changed : Protocol updated Changed : NVM manager updated Changed : FastFlash protocol updated ( SC7731E, SC9832E supported ) Firmware reader Changed : Android 10 specific changes Changed : Initial Tiger and NaT devices support Changed : UltraRead protocol updated ( SC7731E, SC9832E supported under 0S loaders now ) Service NewFeature: Security Repair allow change PSN1/PSN2 - In newer devices PSN1/2 damage may lead to bootlop, ota and other issues - In newer devices PSN1/2 used as bootloader token Changed : Identify : Correct MEMORY and RAM size reading for Android 10 devices Changed : Identify : Read PSN1 and PSN1 Changed : Identify : SC9832E and SC7731E can be used to verify eMMC ReadOnly state (0S loader mode) Changed : Repair : Identify signed devices during repair Changed : NVM : Read and Write operations revised UserData Changed : UserData dump feature updated ( Legacy line fixes ) SPUnlock Changed : SC9863 support updated Changed : SC9832 support updated Changed : PermLock fix ( processed in automatic mode, fix issue with possible PermLock after first unlock try ) NewFeature: Error codes explanation and hints NewFeature: Damaged devices ( security destroyed ) detection NewFeature: Damaged devices ( permLock ) detection Model DB Changed : New generic loaders included for SC7731E with Android 10 ( 0S type ) Changed : New generic loaders included for SC7792E with Android 10 ( 0S type ) Changed : New generic loaders included for Tiger T61x Changed : New generic loaders included for UIS7862 Changed : ZTE, Itel and others line loaders updated to support faster operatons amd more HW variants Other Changed : GUI settings now stored and load select style, settings and other at next run Changed : Lot of different changes and fixes Dongle firmware version required: 0147 Read more here 2020-12-31 Server algorithms for SPD unlock updated Server algorithms for SPD unlock updated with important improvements. No need to update CM2SPD software at the moment, CM2SP2 v2.09 can handle process well. 2020-12-15 Infinity Chinese Miracle II SCR/SPD-RDA v1.07 - RDA8955x CPU line supported As ordinary, unique functions and methods released RDA8955x is an extra cheap SoC with 2G/GPS support. It is used in cheap wearable, IoT and feature phones. Supported CPU list: Spreadtrum: SC6530, SC6531, SC6531(A/C/D) SpreadTrum: SC68xx ( with external PAC ) SpreadTrum: SC770x ( with external PAC ) UniSoc: SC6531E, SC6533, SC6533G, SC770x RDA Mirco: RDA8955G, RDA8955GE, RDA8955L RDA Mirco: RDA8851 rev A,B,C,L,CL RDA Micro: RDA8826 Core NewChip: Support RDA 8955 Line (8955G, 8955GE, 8955L) BugFix: Support for some SC6533 revisions fixed ( Wrong PMT issue ) Support RDA 8955 Line (8955G, 8955GE, 8955L) - Identify ( Security info, compilation info, Hwinfo ) - Format FS / Reset Settings - Read UserCode / PrivacyCode - Repair Security - Read Flash / FW - Write Flash / FW / LOD Service Changed: CompileInfo extraction improved ( RDA / SPRD / UniSoc ) Changed: BOOTROM support improved ( RDA ) Changed: SVC ( Diag ) mode support optimized for modern UniSoc 89xx platforms UserData Changed: Security code read in FlashMode revised ( RDA ) Other BugFix: Lot of small different changes and fixes Option: GUI ( File -> GUI ) : allow select other interface mode !* Default - standard V2 line GUI !* Wide - best for big screen / big distance to monitor !* Wide Log - extend log window to screen size. Optimal for most cases Dongle firmware version required: 0146 Read more here 2020-12-12 Infinity Facebook group Read more here 2020-12-03 Servers are back to work Servers are back to work. We hope everything is well but anyway please let us know if you will see any kind of issues. Thank you once again for your patience ! 2020-12-02 Servers maintenance 03-Dec-2020 11:00 - 13:00 GMT Sheduled servers maintenance 03-Dec-2020 11:00 - 13:00 GMT Some services/sites may be temporary unavailable at that time. Thank you for your kind understanding ! 2020-11-24 iosFileUploader v1.10 released - check uploaded file firmware version by server database - minor bugs fixed Read more here 2020-11-17 Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.09 - SPUnlock for most SPD/UniSoc As ordinary, unique functions and methods released Core Changed : FlashCore protocol updated Flasher Changed : NVM manager updated. Recovery mode rebuild Firmware reader Changed : SPRD Android 4.x line minor changes Changed : Improved structure identification Changed : New types supported (Android 9/10) Service New Feature: SP (Network) Unlock activated ! - Support Legacy SPRD phones on SC7715/SC7731/SC9820/SC9832/SC9850 - Support modern UniSoc phones on SC9820e/SC7731e/SC9832e/SC9850/SC9853i/SC9863 - Support unlock in FlashMode ( ! recommended way, permanent ) - Support unlock in DiagMode ( ! may relock in some certain cases ) - Support unlock for signed and unsigned devices -- Unsigned/Legacy devices supported standalone without server -- Modern devices require server support Test reports and free unlock for testers are HERE Changed : NVM manager updated ( Read/Write process revised ) Other - Setting tab activated -- Allow setup user details to use remote/server functions -- Allow select Firmware path - Changed default paths for different operations - Minor changes and fixes Models tested standalone - free, no need server: Blu C4 Bmobile AX1077+ Bmobile AX1078 Bold T5+ Bolt (Blu) T5 T0040TT sc9832e Bolt (Blu) T5 T0050TT 2sim Tigo sc9832e Bolt (Blu) T5+ T0060TT 2sim Tigo sc9832e Bolt (Blu) T5+ T0070TT 1sim Tigo sc9832e GoMobile 1452 Hisense U963 IMO Q2+ Itel A23s Mobicel Pulse-1 Mobicel Rio SS Mobicel Ruby Mobicel Star Movitel M8416 Safariom Neon Ray Pro Tecno RB6S (SU335) Tecno SA2S Tigo T-Smart 4G sp9820e Models tested via server: Digicel DL3 Itel A14 Hisense U963 HLTE100E Hisense U963 HLTE100E ANdroid 10 (change RS to SS in settings before process) Hisense U40 Android 10 Itel A23R [Itel A23 Jio] Mobicel Beam Mobicel Glo Mobicel Rio SS N-C1 TA-1165 Safaricom Neon Ray Tecno SC7S Vodacom Kicka-4-VE ZTE Blade L130 ZTE Blade A3 2019 ZTE Aspire A3 2019 ZTE Aspire A5 ZTE A3 2020 Claro Dongle firmware version required: 0146 Read more here 2020-11-15 SPD sp-unlock/network lock test process started (FREE) All users are welcome to test new software Read more here 2020-11-03 Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.08 - NAND, Forensic and more features ! As ordinary, unique functions and methods released Core Changed : FlashCore protocol updated Changed : NAND support rebuild Changed : X64 SS/RS loader line handling optimized New SOC : SC9820E with NAND support New SOC : SC7731E with NAND support Flasher Changed : NAND support rebuild Changed : Big files handling optimized Changed : NVM manager updated Firmware reader New Feature : UniSoc NAND SC9820E/SC7731E support activated ! - Allow backup FW from range of phones, based on SC9820E/SC7731E SoC with NAND flash memory - Firmware is complete, not damage any security, ota or any other compatibility Changed : Improved structure identification Changed : Forced reading ( disable deep verify ) option enabled - Use WITH CAUTION! Changed : Android 4.x / Mocor 5 specific changes Changed : UBI defragmentation for NAND devices activated by default Service New Feature : Security Repair allow change BT/WiFi MAC - Useful only in DiagMode for UniSoc(E-line), Flash/Diag for SPRD line Changed : Security Repair options - Generate MAC's - double click at MAC field to generate and activated Changed : Security Repair options - AutoIncremental set SEC2/SEC3 fields, when SEC1 set. Just double click in next field Changed : Security Repair : NVM Manager updated according latest devices changes Changed : Identify : Support identify for UniSoc NAND line Changed : Identify : NAND identify speed increased UserData Changed : Privacy reading types increased to 4 ( +2 new types ) New Feature : UserData DeepVerify and DUMP activated! - Available for users with active Infinity Data Explorer module! - Ignore ALL sprd protocol limitations, which require MEMORY DESOLDER and EXTERNAL MEMORY PROGRAMMER using! - Allow verify and dump COMPLETE USER image for wide range of types and filesystems 1. eMMC with EXT3/EXT4 filesystem. FDE check may differs from Identify! 2. eMMC with F2FS filesystem. FDE check may differs from Identify! 3. NAND with UBIFS. Result image defragmented and prepared for further forensic analyze - Internal checks during dumping make differ, than Identify option, analysis. Even if Identify say FDE - device can be not encrypted. - Ability to resume dumping in case of read fails, can be used much times, as need - After dumping device must be flashed! 1. Get FW or make FW backup from WORKING/GOOD device with complete options if SW asks 2. Complete Flash device or 2. If need revert device to initial state 2.1 : Select FW, uncheck all items ( Rmouse - > Uncheck all ) 2.2 : Select UBOOT/SPL 2.3 : All other settings must be default, not touch anything 2.4 : Flash device Model DB Changed : New generic loaders included, changes some existing once for better compatibility Changed : Generic SC9820E NAND loaders included Changed : Generic SC7731E NAND loaders included QIN QF9 ( QIN1 SC9820E ) - full support : Read/Write FW,Reset Settings,Security,Service - Firmware can be found on support area - Boot key : Call button - Change Lang sequence : Ok, Left, down, ok, 15 times - down, ok, ok, select need language ( English ) Dongle firmware version required: 0146 Read more here 2020-10-29 Infinity Online Service (IOS) updated New product available - Borneo Schematics Activation code (licence) 2020-10-25 Infinity Online Model (CPU) selector released Infinity Online Model (CPU) selector released, it helps to find application for selected model 2020-10-22 Infinity Online Service (IOS) updated - New product available - TFM-Tool software license - AMT Dongle Special Offer (discount price) extended up to 19 Nov 2020 2020-10-19 Infinity Data Explorer v1.10 - MTK, SPD algorithms updated and more improvements Data extraction based on full reconstruction of file system - MTK module updated (Added all files extraction) - SPD module improved and updated - FileSystem library updated (Full support all FAT versions) - Added Function - Save FileSystem (as per users request) - v1.08/v1.09 SPD detection failure bug fixed - Minor bugs fixed Read more here 2020-10-13 Infinity Chinese Miracle-2 MTK/MediaTek v2.16 - Another step forward As ordinary, unique functions and methods released Core Changed : Protocol updated ( Raphael/Legacy ) BugFix : MT6737M/MT6580 Changed : Internal EMI engine rebuild !* LEGACY line : DB rebuild and updated, changed and optimized selection features !* RAPAHEL line : DB rebuild from scratch. Selection feature rebuild. Manual mode removed and changed to automatic. Summary : !* Supported almost all existing memory/dram combinations up to current date for LEGACY lines !* Supported almost all existing memory/dram combinations up to current date for RAPHAEL lines ( up to DIMENSITY line ) !* REMOVED manual EMI selection by bruteforce. NOT NEED ANYMORE set one-by-one internal EMI db counter and boot device every time. All auto. !* In rare case of discrette DRAM may require change EMI once for some specific devices !* After device learning ( via HW report feature ) it will be stored in SW Database and used automatic at every service/flash/repair operation !* Overall : Not need seek compatible preloader files for new/not existing FW's devices, spend time to bruteforce and etc. Just connect and work! Flasher Changed : Core updated for LEGACY line BugFix : MT6737 with Android 10 flashing revised BugFix : Checksum verify rebuild BugFix : Changed memory repartition model for modern scatter formats ( used in Android 10 FWs ) BugFix : Different scatter-version dependencies handled now correct Changed : Core updated for RAPHAEL line Changed : UltraFlash feature updated, new security workarounds supported Service Changed : Identify !* Legacy platform changes, mostly for Android 10 devices Changed : Smart Reset !* Optimized support for different customized and generic cases NewFeature : HW Report ( RAPHAEL - only ) !* Allow read extended info from device about its HW - EXTCSD info ( complete, include eMMC version, all flags etc. ) - used in case of identification for HWrepair purposes - CSD info ( complete, TEMP/PERM write protection status ) - used in case of identification ReadOnly state in some cases - CID info ( FlashIC base info, name, vendor ) - default info, even if boot can nott be completed by some HW or SW reasons - LifeInfo ( SLC, MLC, EOL status and use counters ) - allow understand how bad it feels - RPMB info ( is it key programmed or clean and can be re-used ) !* Feature also allow automatic select and store for further use BOOTROM connection settings for RAPHAEL devices ( DRAM init ) !* HWreport not require complete boot in case of semi-dead devices. Useful for HWdebug !* HWreport result may vary in diffirent models and agents, even on same SoC! Firmware Reader Changed : LEGACY line support updated ( Android 10 line ) Changed : Support more different types Changed : FileSystem tools updated. Issues with reading on some systems should be fixed. Changed : More wide range of scatter versions creation according device specific data Other BugFix : Lot of minor changes and fixes Option : GUI ( File -> GUI ) : allow select other interface mode !* Default - standard V2 line GUI !* Wide - best for big screen / big distance to monitor !* Wide Log - extend log window to screen size. Optimal for most cases Info !* Strongly recommend to use ONLY Infinity or Factory firmwares for modern Android 9/10 device to avoid lot of issues - FOTA issues - Attestation Key Issues - Tee Key issues - Security issues Dongle firmware version required: 0146 Read more here 2020-09-15 Smart-Card update procedure for several card-reader types If you have the card-reader mentioned below and last Dongle firmware update attept was failed do the next: - Insert smart-card into another card-reader - Update Dongle firmware: do it ONLY ONCE even in case of error The next card-readers shold be moved to TRASH immediatelly: - USB Fenix Card Reader - DITS CCID Smart Card Reader - DITS Ezy Smart Card reader Module SC 2020-09-07 Infinity Online Service (IOS) updated - new software activation available AMT-Dongle software activation for Infinity users is ready, you can activate this software for any Infinity product smart-card Read more here 2020-09-04 Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.07 - UltraReading & New Features activated As ordinary, unique functions and methods released Core Changed : FlashCore Protocol updated BugFix : SC9832E line support updated BugFix : SC9820E line support updated BugFix : SC9863x line support updated NewFeature : eMMC ReadOnly check for DLv4 and later ( automatic during boot ) Changed : All service features speed under FlashMode increased Flasher Changed : Flash Engine updated Changed : FastFlash protocol updated Service BugFix [Identify] : FS state detection may fail for legacy SPD line, fixed Changed [Identify] : SelfLearn / Automatic DB update during "Identify" rebuild Changed [Identify] : Support detection of AES and RSA-enabled auth in devices/loaders Changed [Identify] : Support correct BASE <-> DEVICE verification for optimal loader selection BugFix [Read Privacy] : Privacy Lock reading on some devices may fail , fixed NewFeature [Read Privacy] : Mobile AntiTheft password reading ( another version of "privacy lock" ) BugFix [Format FS] : Fixed Format FS in DiagMode for Android 10 and modern Android 9 devices Firmware Reader Changed : Complete FWReader rebuild to cover most count of different devices, existing on market * !* Almost all Flashing issues has been fixed, FWRead repeat required for problematic cases/models! Changed : UltraReading option activated ! * !* Now reading of UniSoc devices 3-5 times faster, than before - approx 20 mins instead of 70 for SC9853i (2.2 GiB) comparing to older releases - approx 12 mins instead of 40 for SC9832E (2.5 GiB) comparing to older releases - approx 20 mins instead of 60 for SC9863 (4.4 GiB) comparing to older releases - approx 15 mins instead of 50 for SC7731 (1.5 GiB) comparing to older releases !* Most generic loaders now support FastReading ( RS,SS,0S,1S,2S ) - Use USB-2 port ! - DO NOT use USB-3 port ! - DO NOT use USB-HUB ! Changed : Improved structure identification Changed : Support more different types Changed : Android 10 devices support improved Model DB Changed : New Generic loaders included and updated existing ones Changed : SC9820E(eMMC), SC9832E, SC9863x loaders updated Other BugFix : Minor changes and fixes Changed : Power Reset/Switch off scenario operation-depend now Option : GUI ( File -> GUI ) : Allow select other interface mode* !* Default interface - standard V2 line GUI !* Wide interface - best for big screen / big distance to monitor !* Wide log - extend log window to screen size - optimal for most cases Dongle firmware version required: 0145 Read more here 2020-09-03 Infinity Data Explorer v1.09 - MTK, SPD, RDA updated and more improvements Data extraction based on full reconstruction of file system - MTK module improved - more device supported - SPD module updated - SPD66x0 support released - RDA module updated - more Code pages supported - GUI updated and improved - Minor bugs fixed Read more here 2020-08-24 Infinity Chinese Miracle-2 MTK/Mediatek v2.15 - New models and features As ordinary, unique functions and methods released Core Changed : Loader v2028 supported and tested ( v2020 skipped, unstable ) Changed : Protocol updated ( Raphael/Legacy ) NewChip : MT8167 supported ( AutoBoot, SelfLearn supported ) BugFix : MT8163 support should be fixed Flasher Changed : UltraFlash - UNIQUE FEATURE ! Changed : UltraFlash : It is possible to fix Almost all SECURITY-related (PUBKEY etc. verify/missmatch) errors ( Mostly when wrong DA used on EFUSED models ) !* Feature may not work for some "exotic" secure/da/fuse configurations and cases ! !* Feature not work with "remote authentificated" devices yet ! Service Changed : Identify !* Better AndroidInfo extraction, activated check and filter of similar fields !* It is possible to read more different info about device, if possible ( can be activated from settings ) Changed : Smart Reset !* Optimized support for different customized and generic cases Firmware Reader Changed : Improved structure identification Changed : Support more different types Changed : More careful checking of vendor, security and ota-specific data Changed : DevInfo ( FWname ) creation optimized Changed : Slow devices reading revised ( MT8167, MT6570, MT6580 and similar ) !* It is strongly recommend to enable autoupdate or use latest MT2 version to service latest Android 9/10 phones/tablets ! MemoryTool Changed : Bugfixes and optimizations Model DB Changed : New agents included for various set of devices ( Alcatel, Moto, Acer, Generic ) Changed : DB revision done, some issues fixes Other BugFix : Many minor changes and fixes Dongle firmware version required: 0145 Read more here 2020-08-12 Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.06 - Android 10, FastRead, FastFlash As ordinary, unique functions and methods released Core Changed : FlashCore Protocol updated Changed : DiagCore Protocol updated Changed : NAND protocol adaptation Changed : Operations speed increased Flasher Changed : Flash Engine updated Changed : Handling for 64bit files optimized Changed : Activated FastFlash V1 protocol * Changed : Activated FastFlash V2 protocol * !* FastFlash protocol allow increase flashing speed for big unsparsed images !* FastFlash protocol reduce flashing time up to 4-6 times, depend on device configuration - 3-4 minutes against 20-25 !* FastFlash activated automatically, if can be performed !* GOOD USB cable and GOOD USB port must be used - do not use USB HUBs ! Changed : Support for new PAC formats activated: v2.x.x line Service Changed : Identify scheme : Read more accurate and complete info * !* Include modern Android 9 and Android 10 devices Changed : Precise FileSystem settings detection ( Type and Encryption algo ) Changed : Better security detection Changed : Format FS / Reset settings updated Firmware Reader Changed : Reading speed up to 30% faster ! * !* Test feature, support modern UniSoc devices: SC7731E, SC9832E, SC9863 !* Test feature, only RS-featured loaders supported ! Changed : Android 10 support activated! * !* Support latest Android 9 and modern Android 10 devices from now! !* Allow read complete firmware image from Android 10 devices without loss any ota/vendor abilities Changed : X64 devices/loaders native support activated for complete reading Changed : SW now create Android-version depend images for better compatibility Changed : SW now create correct FileSystems bundle according device settings * !* Almost reducing "hang" case after flashing Changed : Improved structure identification Changed : Support more different types Changed : Structure identification and NAND reader more stable now (complete E-series NAND adaptation is on the way) Model DB Changed : New loaders included for various set of devices Changed : New Generic loaders included and updated existing ones Other Changed : Removed outdated options from platform tab, many options changed to atomatic mode BugFix : Minor changes and fixes Info : Android 10 enabled devices : SC7731E, SC9832E, SC9863 FastFlash enabled devices : SC9832E, SC9863 Dongle firmware version required: 0144 Read more here 2020-08-11 Infinity Shell v2.00 released - user interface changes - server communication process updated - software update downloading method updated - product news downloading method updated - models database update method improved - many internal changes Read more here 2020-08-04 Infinity Pinout database v2.00 released Information about boot keys, pinouts, test-points, hardware updated NOTE: - pinout v2.00 will be installed to /pinout2/ folder by default, folder with legacy pinouts /pinout/ is also there and not deleted - Infinity Shell will be updated to work with pinout v2.00 in some time Read more here 2020-07-27 Infinity Chinese Miracle-2 MTK/Mediatek v2.14 released - UltraFlashing activated ! As ordinary, unique functions and methods released Core Changed : Protocol updated ( Raphael/Legacy ) NewChip : MediaTek Dimensity line ( MT68xx ) support under test Flasher New Feature : UltraFlash - UNIQUE FEATURE ! !* ALLOW IGNORE MOST EXISTING SECURITY/FUSE/DA RESTRICTIONS and forcedly flash protected regions !* Feature support Whole RAPHAEL line from MT6731 to MT6785. Vendor and security settings configuration in most cases is not important. !* FEATURE CAN FLASH ANYTHING SIGNED/UNSIGNED TO PROTECTED AND/OR VERIFIED REGIONS !* Tested with Huawei, Vivo, Infinix, Tecno "protected" and other models !* Feature may not work in some "exotic" secure/da/fuse configurations and cases! !* Feature not work with "remote authentificated" devices yet! Service Changed : Reset PrivacyLock updated !* Action selection now depend on different factors ( Android 6, 9 issues fixes ) Changed : Smart Reset !* Optimized support for Android 5, 6 !* Optimized support for "customized" cases Firmware Reader Changed : Improved structure identification Changed : Support more different types Model DB Changed : New agents included for Tecno, Infinix devices devices ( G70/G80/G90 ) Other BugFix : Minor changes and fixes Dongle firmware version required: 0144 Read more here 2020-07-14 Infinity Chinese Miracle-2 MTK/Mediatek v2.13 released - Android 10 and new SoC types As ordinary, unique functions and methods released Core Changed : Protocol updated ( Raphael/Legacy ) NewChip : MediaTek MT8765 supported NewChip : MediaTek MT8766 supported NewChip : MediaTek Helio G70 supported NewChip : MediaTek Helio G80 supported Service Changed : Identify !* More accurate FS state detection !* Support for different "customized" devices identify - Huawei and similar !* Support for A/B structure devices for read complete info - Nokia, Doogee, Infinix and similar !* Support GSI/Trebble devices for read complete info !* Android 5/6 devices fixes Changed : Smart Reset !* Optimized support for Android 5, 6, 10 !* Optimized support for "customized" cases - Oppo, Vivo, Huawei and similar !* Optimized work with GSI/Trebble/A/B devices Firmware Reader New Feature : Android 10 supported! !* Read FW result is completely factory-like BugFix : Work with big partitions ( more than 4 GB ) Changed : Logical FileSystems sparsing supported Cahnged : More intellegent identify of unknown layouts Changed : Improved structure identification Changed : Support more different types Changed : Android version-depend additional data creation Model DB Changed : New agents included for Xiaomi devices ( G70/G80/Dimensity ) Other BugFix : Minor changes and fixes GUI : Store last used FormatMode enabled Thanks to : kamal_singla, gracy_elec and all other friends ! Dongle firmware version required: 0144 Read more here 2020-07-01 Infinity Chinese Miracle-2 MTK/Mediatek v2.12 - F2FS support, EncryptInfo and more As ordinary, unique functions and methods released Core BugFix : Some legacy chips support may broken, fixed (Agent 19xx-20xx) BugFix : BROM mode support fixed for MT6752/MT6753 Service Changed : Identify procedure updated, read more useful info on Android 10 devices !* From now on for modern Android ( 7 - 10 ) shown more detailed UserData state with encryption methods !* That replace old ENCRYPTED/PLAIN states to avoid false-positive results for forensic cases !* It may work not stable on earlier Android releases, it is recommend to check state also via MemoryTool if required New Feature : Smart Reset ( Format FS option ) !* Support RAPHAEL line in SMART mode, not need change any options !* Function detect correct settings automatically to avoid user from mistakes !* Function detect correct file systems, include modern F2FS, and all variants of EXT filesystem to support wide range of old and modern devices !* Function detect and reset all settings, include FRP and Privacy Locks ( for USER DATA SAFE methods - USE SEPARATE OPTION!!!!! ) Changed : META : Attestation Keys download procedure updated Firmware Reader New Feature : F2FS file system detection and creation supported Changed : Improved structure identification Changed : Support more different types Changed : Combo scatter creation revised Changed : Platform and version depend scatter creation for better compatibility with SPFT Changed : Android version-depend additional data creation MemoryTool Changed : Structure identification New Feature : Build FILE SYSTEM at selected partitions !* Allow make F2FS, EXT4 old and EXT4 modern variant of filesystem at selected partition !* Select need partition ( for prevent mistakes - just one partition per operation allowed ) and desired filesystem !* Useful also in case of unlocked devices with change FS or encryption method needs Flasher New Feature : Android 10 specific changes on verification and file selection Changed : Selection order modified according last changes of build SDK's and vendor-specific cases Changed : Scatter tab changes, specific to multi-storage selection and settings Model DB Changed : New agents included for Tecno, Infinix, Itel, Panasonic, Walton brands ( with different SoC lines in every ) Other BugFix : Minor changes and fixes Dongle firmware version required: 0144 Read more here 2020-06-22 Infinity Data Explorer v1.08 - Search Engine updated, SPD improvements and more Data extraction based on full reconstruction of file system - SPRD engine rebuilded - contacts save method updated - long SMS parse method updated - HTML export released (via templates) - gui: log autoclear option before new operation - gui: pop-up menus for log (clear and save options) - folder with date/time creation for Converter - Minor bugs fixed Read more here 2020-06-14 Infinity Chinese Miracle-2 RKT/Rockchip v2.02 - New chips and latest Android support As ordinary, unique functions and methods released Core BugFix : Connection stack updated BugFix : Compatibility with latest drivers releases Changed : Core rebuild for support modern SoC's and old SoC's revisions with Fuse/SecureBoot support Support RK29xx series ( NAND ) Support RK30xx series ( NAND, eMMC ) Support RK31xx series ( NAND, eMMC ) Support RK32xx series ( NAND, eMMC ) Support RK33xx series ( NAND, eMMC ) Support RKPX5 series ( NAND, eMMC ) Service Changed : Identify procedure rebuild. Complete info reading and parameters detection !*If Identify CAN NOT display SWVersion details it may means device can not be serviced for FWRead operations Changed : FRP reset revised to support latest Android versions and Modern SoCs Changed : FS format revised to support latest Android versions and Modern SoCs Firmware flasher New Feature : Modern RK UnionImage flashing supported New Feature : Combined Sparse image flashing supported New Feature : Repartition for RK-PARA and RK-GPT supported New Feature : Factory (UnionImage) Firmware flashing for latest Rockchip SoCs versions/revisions Changed : Support Infinity Firmware Flashing ( Old and Modern SoCs revisions ) Firmware Reader New Feature : Android 7 devices supported New Feature : Android 8 devices supported New Feature : Android 9 devices supported Unique : Firmware read allow read FW from "unreadable" Android 8/9 devices !*Feature support eMMC and NAND devices which can not be dumped by any tools over native protocol ( No Root / ADB need ) !*Feature support some "slow" NAND cases on modern SoC's !*Feature may not work on some NAND devices with FTL/ECC errors and Flash Faults Changed : Improved structure identification Changed : Support more different types Other BugFix : Minor changes and bugfixes Drivers : New driver package with Win8/Win10 x86/x84 are at support area Info : SW may work not correct in some cases with RK29xx and RK31xx OLD NAND 4.x devices Info : New driver installation is REQUIRED for correct work ! Dongle firmware version required: 0144 Read more here 2020-06-13 RKT (Rockchip) drivers package updated Drivers_RKT_DrvAssist_v4.91 available for download at support area 2020-05-28 Infinity Online Service (IOS) updated - New cheaper prices for Xiaomi Mi Account remove any model (clean only): EU countries, Ukraine, Belarus, Kyrgyzstan - Xiaomi Mi Account remove for activated phones (clean only) 2020-05-23 Infinity Chinese Miracle-2 MTK/Mediatek v2.11 - New features activated As ordinary, unique functions and methods released Core BugFix : META protocol updated Changed : Loader v2012 supported and tested Service Changed : Identify in META now read NVRAM dump that is compatible with flash mode writing !*Feature may not work on old devices - Android 4.x, MT6572 and similar legacy chips !*Feature useful also for devices which can not connect via flash mode as security save way Changed : Identify now also verify EXTRA security flags !*Signed types detection ( RSA signed security items ) !*Encrypted types detection ( Vendor-modified security items ) !*Edit/Repair security on those types IS NOT possible at the moment ! !*Swap security on those types IS NOT possible at the moment ! New Feature : Google Attestation key installation !*Allow upload attestation keys to devices which require it ( Google Key red mark in phone after complete boot ) !*In most cases it model-depend file! !*SW DO NOT allow select wrong file ( non attestation-key file ) by verify content of file !*Files in most cases delivered with factory fw package ( kb.bin , Android_Key and other similar ) Firmware Reader Changed : Improved structure identification Changed : Support more different types Flasher Changed : File selection optimized for latest build revisions - multi-bundle etc. MemoryTool Changed : Init PMT procedure updated (NAND, EMMC, UFS) Changed : Init Preloader procedure updated (NAND, EMMC, UFS) Other BugFix : Minor changes and bugfixes BugFix : Compatiblity issues fixes Dongle firmware version required: 0143 Read more here 2020-05-21 Infinity Chinese Miracle-2 MTK/Mediatek v2.10 - usb drivers compatibility issue How to use CM2MT2 v2.10 safely: - Wait and install CM2MT2 v2.11 in a short time or make the next right now: - Find and delete (or rename) the next applications: C:\Program Files (x86)\Intel\Bluetooth\devmonsrv.exe C:\Program Files (x86)\Intel\Intel(r) usb 3.0 extensible host controller driver\application\iusb3mon.exe C:\Program Files (x86)\Nec Electronics\usb 3.0 host controller driver\application\nusb3mon.exe C:\Program Files\Renesas Electronics\usb 3.0 host controller driver\application\nusb3mon.exe C:\Program Files\via xhci uasp utility\usb3monitor.exe - Reboot PC - Run CM2MT2 v2.10 What is the issue ? Software compatibility issue has been detected, it's a software conflict with some kind of usb drivers. As a result users may expeience problem like dongle misconfiguration with error code 70 and similar. New CM2MT2 version with improved compatibility should be released in nearest time. What to do in case of dongle misconfiguration error code 70: - Write HERE your dongle details - S/N or HWID - Attach fault.bin file, it's located at C:/InfinityBox/CM2MT2/ folder - Wait for instruction Dongle firmware version required: 0143 Read more here 2020-05-20 Infinity Chinese Miracle-2 MTK/Mediatek v2.10 - New MTK chips and UFS storage As ordinary, unique functions and methods released Core NewChip: Helio G90T (Formely MT6785) supported (UFS / eMMC) NewChip: MT6731 supported (eMMC / NAND) NewChip: Helio A20 (Formely MT6761 low-cost revision) supported NewChip: Helio P90 (Formely MT6779) support under test (UFS / eMMC) BugFix : MT6595/MT6597 BROM support broken, fixed (Agent 17xx-19xx) New Feature : UFS FlashIC support !* Support flashing Factory / Infinity FW !* Support MemoryTool !* Support Factory Firmware reading !* Support Service operations !* SOC's on market, support UFS chips right now : G90, P70, P90 Service Changed : Repair security procedure updated (Flash and Meta mode) Changed : SPUnlock procedure updated (Flash and Meta mode) Changed : Identify procedure updated Changed : Format FS / Reset FRP now support UFS flash too New Feature : Modem Re-Init (NVfix) !* Useful after FixBB, in case of modem subsystem alive Firmware Reader New Feature : UFS flash support New Feature : Combo scatter creation for newest chipset !* Produced scatter MAY NOT work with OLDER SPFT (factory flasher) below 19xx versions! !* Produced scatter is 100% like factory ones Changed : Improved structure identification Changed : Support more different types Changed : NAND support revised Changed : LEGACY line support revised Changed : Platform and version depend scatter creation for better compatibility with SPFT Changed : LEGACY line with Android 9 (MT6580 and similar) specific changes MemoryTool New Feature : UFS flash support !* Support Read , Write , Erase partitions !* Support RePartition !* Support Preloader init !* Support Change Work mode (ADR / PRT) !* Change storage settings useless, all flash content mapped in single mode Changed : Structure identification Changed : Automatic files selection at folder change Flasher New Feature : Support COMBO scatter's (v2.xxx) !* Automatic selection depend on device Flash (UFS/EMMC/NAND) !* Storage selection done automatic according detected, for end-user all selection and rest settings remain same as before New Feature : Support MTK chips with UFS FlashIC flashing !* All features (Erase / Verify / PMT upgrade / Backup / HW Compatibility) work for devices with UFS as well Changed : Scatter tab changes, specific to multi-storage selection and settings Meta protocol functions updated Changed : Updated security detection feature BugFix : Updated structure verification Other BugFix : A lot of minor changes and bugfixes applied Changed: Many internal changes to improve compatibility with other applications, antiviruses and similar software. Changed: Software load/operation speed improvements implemented Dongle firmware version required: 0143 Read more here 2020-05-14 DongleManager v1.79 released - smart-card database updated with new smart-card types - minor gui changes - error messages text updated 2020-05-06 DongleManager v1.78 released - minor gui changes - installed modules detection method updated 2020-04-30 Infinity Chinese Miracle-2 SPD/UniSOC v2.05 - NAND, KaiOs and new features As ordinary, unique functions and methods released Core NewChip : SC7731E with NAND ( KaiOS and MocorDroid5 ) NewChip : SC7715x with NAND ( KaiOS , MocorDroid5 , Android 4x) NewChip : SC9820x with NAND ( MocorDroid5 , Android 4x) Protocol : Speed increased for most operations ( SPD and UniSOC ) Protocol : Protocol changes according SPD/UniSOC R23 line New Feature : NAND support ( SPD and UniSOC generation ) !* Support flashing Factory / InfinityFW !* Support correct flash selection and servicing phones with NAND !* Support InfinityFW reading ( Complete, Factory-Like ) !* Support Service operations Service Changed : Repair security procedure updated (Flash and Diag mode) Changed : Identify procedure updated !* Support complete and fast NAND devices identification !* Support complete simlock info structure identify and verify !* Support multi-nv structure detection and security info detection !* Database update / self-learning updated !* FileSystem identification support UBIFS and F2FS detection Changed : Format FS / Reset FRP procedure updated Firmware Reader New Feature : NAND support !* Support old and new generations ( SPD and UniSOC ) !* Support plain Android , KaiOs and MocorDroid5 OS !* Automatic and correct FileSystem creation for NAND devices !* Support all security types, include UniSoc secure/signed !* Produced FW is 100% like factory one Changed : FileSystem creation engine updated ( UBIFS support , bugfixes ) Changed : Improved structure identification Changed : Support more different types Changed : Old SPD line support rebuild ( SC7715,SC7731,SC983x,SC9820x ) Changed : Fixed FW creation in full manual / skip verify mode settings Flasher New Feature : Complete flash erase ( whole flash format ) during flashing ( eMMC / NAND ) New Feature : Correct NAND flashing support ( SPD and UniSOC ) ( Factory PAC and InfinityFW ) Changed : Flashing core for InfinityFW more stable Loader Database NewChip : SC7715 BASE NAND revisions included NewChip : SC9820 BASE NAND revisions included NewChip : SC7731E BASE NAND revisions included NewChip : SC7731E BASE eMMC LOW_MEM revisions included ( cheap A8-A9 devices ) NewChip : SC7731x BASE eMMC LOW_MEM revisions included ( old A4-A5 GEA devices ) Other Changed : Manual mode : automatic structure and setting detection in manual mode Changed : Automatic base settings selection for BASE loaders ( Protocol, Charging, FlashSettings ) Changed : Separate NAND mode option activated in platform settings for manual mode BugFix : Lot of minor changes and bugfixes Changed : Software compatibility with other applications improved Read more here 2020-04-24 Infinity-Box/Dongle support renew orders in April 2020 - Dongles/Boxes renewed in April 2020 for 1 year will be renewed for 14 months - two additional months free - Dongles/Boxes renewed in April 2020 for 2 years will be renewed for 26 months - two additional months free 2020-04-22 Information about Infinity products support period renew due to situation with COVID-19 Two months support period extend for free for all users Read more here 2020-04-18 DongleManager v1.76 released - minor gui changes - external activation detection method updated 2020-04-04 Infinity Chinese Miracle II SCR/SPD-RDA v1.06 - New models and features As ordinary, unique functions and methods released Supported CPU list: Spreadtrum: SC6530, SC6531, SC6531(A/C/D) SpreadTrum: SC68xx ( with external PAC ) SpreadTrum: SC7702 ( with external PAC ) UniSoc: SC6531E, SC6533, SC6533G, SC7702 RDA Mirco: RDA8851 rev A,B,C,L,CL RDA Micro: RDA8826 Core NewChip: Support UNISOC 8910 (FLASH) under test NewChip: Support IVY IoT (FLASH/SVC) under test Changed: UpToDate Protocol changes for latest FP platforms ( UniSoc ) BugFix: Connection on SPRD tab BugFix: BOOTROM mode on latest SC6533G branches Support UNISOC 8910DM / UIS8910 chipset ( SVC mode ) - Identify ( Security info, compilation info, modem info , APinfo ) - Format FS / Reset Settings - Read UserCode / PrivacyCode - Repair Security !* Generic types only New Feature: SVC ( Diag ) mode support for SPRD / UniSoc - Identify ( Security info, compilation info, modem info ) - Format FS / Reset Settings - Read UserCode / PrivacyCode - Repair Security !* Generic types only Service BugFix: Security repair not allow use some "non-standard" combinations ( RDA / SPRD / UniSoc ) Changed: CompileInfo extraction improved ( RDA / SPRD / UniSoc ) Changed: GUI revised for repair part ( CS info, Automatic complete at double click for security fields ) UserData BugFix: Security code read in FlashMode revised ( SPRD ) Other BugFix: Lot of small different changes and fixes Read more here 2020-04-02 Information about Infinity products support period renew and other features due to situation with COVID-19 Information about Infinity products support period renew and other features due to situation with COVID-19 Read more here 2020-04-01 Special offer for users/sellers with Infinity Lanaguage Editor smart-card dongle and/or Infinity Content Extractor smart-card dongle on hands If you are an owner of a separate Infinity Lanaguage Editor smart-card dongle and/or separate Infinity Content Extractor smart-card dongle there is an option to convert that dongles to Infinity-Box/Dongle or to Infinity [BEST] dongle with small charge. Read more here 2020-03-16 Infinity Data Explorer v1.07 - SPRD engine rebuilded and more Data extraction based on full reconstruction of file system - SPRD engine rebuilded - contacts save method updated - long SMS parse method updated - HTML export released (via templates) - gui: log autoclear option before new operation - gui: pop-up menus for log (clear and save options) - folder with date/time creation for Converter - Minor bugs fixed Read more here 2020-03-11 Infinity Data Explorer v1.06 - Android contacts/sms support and more Data extraction based on full reconstruction of file system - Contacts and accounts reconstrucion from Android storage contacts2.db - SMS messages reconstrucion from Android storage mmssms.db - Data storage engine rebuilded - TXT file storage format updated - Minor bugs fixed Read more here 2020-03-07 Infinity Chinese Miracle-2 MTK/Mediatek v2.09 - SP-unlock for modern platforms and more As ordinary, unique functions and methods released Core BugFix : SelfLearning ( Automatic Boot Selection ) feature updated !*In some cases may require repeat learning for some platforms New Feature : Enter META from BROM mode !*Support LEGACY legacy !*Support RAPHAEL line !*In case of secure fuse, auth can be used ( setup in model selection, or manual select as AUTH file ) !*May not work in TestPoint cases on some platforms Service Changed : Repair security procedure updated (Flash and Meta mode) Changed : SPUnlock procedure updated (Flash and Meta mode) Changed : Unlock in Meta mode activated for modern platforms ( MT6739 and newer ) Changed : Identify procedure updated Firmware Reader Changed : Improved structure identification Changed : Support more different types BugFix : Fixed some old platforms support MemoryTool Changed : Path Selection now automatically select files in WRITE FILE fields if they are exists in selected folder Flasher BugFix : Fixed flashing for old slow platforms ( MT6735 / MT6580 ) Meta protocol functions updated Changed : Identify now read all Android info, like in FlashMode !*Feature will not work on old devices ( Android 4.x, MT6572 and similar legacy chip typess ) Changed : Updated security detection feature BugFix : Updated different Legacy and Modern platforms support Modem warmup not cause fatal errors on some old phones Modem-less devices detection ( wifi tablet / smartwatches ) Changed : Format FS revised *!Some models can not be reset with that feature ( found in some Oppo ) BugFix : Updated structure verification Changed : Repair Security rebuild, support more types and non-standard cases New Feature : SP Unlock Tested and confirmed as working in LEGACY line ( Teseted with MT6735, MT6580, MT6752, MT6753. Should works on other legacy chip types ) Tested and confirmed as working in RAPHAEL line ( Teseted with MT6739, MT6761, MT6755, MT6750. Should works on other Raphael chip types ) We are looking for user reports and interest test cases Other BugFix : Some minor changes and bugfixes Read more here 2020-02-25 Infinity Chinese Miracle-2 MTK/Mediatek v2.08 - New models and repair features As ordinary, unique functions and methods released Please do not forget to download new drivers v5.1632_x86_x64 ! Core: Changed : Loader v1952 supported and tested BugFix : Rebuild support for MT6572 line ( KaiOs and old devices ) Changed : Automatic selection of higher available BASE loader at startup Changed : Automatic protocol switching for RAPHAEL line Changed : Initial META protocol support Changed : AutomaticBoot selection revised. More types and combinations are supported. Changed : Protocol updated for RAPHAEL line New feature : Meta protocol support activated !*Support Legacy line ( MT6572 .. MT6595 ) !*Support Raphael line ( MT6750 .. MT6797 ) !*Support Modern Raphael line ( MT6761, MT6765 and newer ) Function : Identify ( AP/MD, SWversion info, Security details ) Function : Reset Settings / Format FS ( NOT touch FRP ) Function : Repair security for Legacy line ( from MT6572 and up to 6580 ) Raphael line ( from MT6570 to MT6765 etc. ) !*Devices with SLA will not work for repair without auth! ( even if Meta started ) !*Devices with OTP will not work for repair! ( SW will just show write error ) Service: Changed : Format FS procedure updated BugFix : Identify procedure updated and revised Changed : eMMC life counter check ( Raphael, more accurate status handling for latest loaders ) UserData: Changed : Reset Privacy Locks procedure updated MemoryTool: BugFix : Long-run reading optimized for RAPHAEL line Firmware reader: Changed : Updated support for legacy platforms Changed : Updated support for MT6739 FP-like and KaiOS phones Changed : Local database update Changed : Data verification improved Changed : More types supported Flasher: BugFix : In some cases were made wrong SV5_BL image selection for EMI base Changed : Protocol updated for RAPHAEL line Changed : Protocol update for LEGACY line BugFix : Flash Erase ( whole mode ) revised BugFix : Flash Pre-Erase ( safe upgrade mode ) revised Other: Changed : Boot helper updated. Take attention to software logs and follow them. In most cases that enough to setup correct settings New feature : Reboot option activated in main tab. Switch charge / power off mode after operations New feature : META switch option activated in main tab. Used to switch SW between FLASH and META mode Changed : Loader database updated Changed : Minor changes in GUI, check buttons/fields hints to know more about alternative modes and special options of supported functions Info: META require working device condition. Charged battery (more than 20%). Installed drivers. New drivers v5.1632_x86_x64 is at support area. Read more here 2020-02-24 Infinity Data Explorer v1.05 - MTK functions for SMS released, Heuristic engine updated Data extraction based on full reconstruction of file system - SMS extraction for MTK activated, supports multipart sms supported as well - Heuristic engine updated - more data can be found/extracted from the unknown dumps - GUI improved - Minor bugs fixed Read more here 2020-02-03 Infinity Data Explorer v1.04 - SPD functions improved, Heuristic engine updated Data extraction based on full reconstruction of file system - SMS message extraction for SPD released. Multipart SMS messages are supported - Heuristic engine updated - more data can be found/extracted from the unknown dumps - GUI improvements - Minor bugs fixed Read more here 2020-02-02 Infinity Online Service (IOS) updated New products: Xiaomi Mi Account remove any model (clean only) - Russia, Ukraine, Turkey, Kyrgyzstan, Kazakhstan, EU countries, Belarus, Nepal, India 2020-01-30 Infinity Online Service (IOS) updated New product - Huawei FRP Reset Key (all models) by Serial Number 2020-01-27 Infinity Online Service (IOS) updated New product - Xiaomi Find Device check Clean or Lost status 2020-01-14 Advertize your YouTube channel with Infinity software video Advertize your YouTube channel with Infinity software video Read more here 2020-01-12 Infinity Chinese Miracle-2 SPD/UniSoc v2.04 - Xiaomi, KaiOs, RepairSec, PACv2 and more As ordinary, unique functions and methods released - Support for PACv2 format activated - Core updated - Protocol updated - SC9820E support activated ( Generic and Secure types ) - Repair security option activated Allow repair device security items on generic devices Work in Flash mode Work in DiagChan mode SimLock-enabled devices may NOT work Security-enabled devices will NOT work - Firmware Flasher updated Updated core Updated PAC types support Revised NVManager - Firmware Reader updated More accurate data verification Reading speed optimized for some UniSoc models Android version-depend mode activated ( allow avoid flashing issues on android 9 and newer ) KaiOS devices supported ( SC7731E eMMC, SC9820E eMMC tested and working ) now for Read Firmware - Identify procedure revised Now it also support for security verification ( signed NV ) Better FS state verification More usable build props info extraction - Revised manual mode selection and possible combinations ( can combine firmware and loader from any source ) - Loader database SC7715 eMMC loaders included SC9820 loaders updated SC9863 loaders updated SC9820E eMMC loaders included Various range of models from Wiko, LYF, BLU, BQ, Symphony, Itel and others included in DB - Other Bug fixes and changes according users requests - Extra Xiaomi QIN 1S+ supported ( Identify, Repair, Firmware Reading, Reset Settings ) BKey : Call button Xiaomi QIN 2 supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button Xiaomi QIN 2 Pro supported ( Identify, Firmware Flash, Repair, Firmware Reading, FRP, Reset Settings ) Bkey : Assistant button Special thanks to respected Mr. gracy_elec Read more here 2020-01-08 Infinity-Box [BEST] NK2 v1.20 - 220.4G, 2.3 and more ! HMD Nk 220 4G (2019) Nk 220 4G - TA-1148, TA-1155, TA-1171 - Identify, check securiy - Reset Settings/Format FS - Read UserCode - Backup security HMD Nk 2.3 Ironman Nk 2.3 - TA-1206, TA-1209, TA-1211, TA-1214 - Identify - Flash Firmware - Reset Settings/Format FS - Reset FRP - Base Loader database updated ModelFinder updated Bugfixes and minor changes - MTK SP Flash Engine updated Updated loader database Nk 2.3 support activated in standalone mode - SPD FP SVC engine updated Nk 220 4G support activated ( partial ) UserCode reading revised Identify revised - Support New firmwares for supported models can be found at support area New drivers for 105/110/220 can be found at support area Read more here 2020-01-07 Updated SPRD drivers for [BEST] Updated SPRD drivers uploaded to [BEST] support area. Please read note before use ! 2020-01-05 Laelo tool new version 0.75 released Laelo tool new version 0.75 released Read more here 2019-12-27 Infinity Data Explorer v1.03 - RDA based firmware images are supported and more Data extraction based on full reconstruction of file system - MTK module improvements - RDA based firmware images are supported - Show Additional info (IMEIs, User Code) for RDA based firmware images - GUI improvements - Minor bugs fixed Read more here 2019-12-18 Infinity Chinese Miracle-2 MTK/Mediatek v2.07 - New models and features Core: NewSOC : MT6785 support under test NewSOC : MT6885 support under test Changed : Protocol updated for RAPHAEL line Changed : Protocol updated for LEGACY line BugFix : MT6752 support fixed BugFix : MT8172/MT8173/MT8176 BROM support fixed BugFix : MT6570 support fixed Changed : EMI engine revised Changed : AutomaticBoot selection revised. More types and combinations are supported. Changed : Loader v1924 supported and tested Changed : Loader v1936 supported and tested Changed : Loader v1944 supported and tested Flasher : New feature: unmerged signature support - Files with external signatures now flash correctly New feature: Forced mode for Raphael line - Allow automatically skip repartition, erase operations if it was not allowed without break flashing New feature: WHOLE Flash Pre-Erase - Erase whole USER region. Destroy ALL data include unique and secure one! Support both Modern and Legacy lines. Changed: Repartition procedure rebuild to support modern devices and special cases (user memory issues and other fixes) New feature: Smart erase - In manual mode selection and enabled pre-erase all unchecked partitions will not be touched - Storage boundary checks now works correct on legacy and modern lines Firmware Reader / Maker: Changed: Local DB updated to latest version Changed: Scatter creation support latest platforms and variants Changed: Scatter compatibility with SPFT optimized ( for DL only mode ) New feature: FileSystem creation and params now generated according Android version New feature: Ability to skip "critical" partitions verification during read ( bl-unlocked devices and specific cases ) MemoryTool: New feature: Switch working mode ( ADR - PRT options in global settings ) without tool restart (no need to exit and run software again) New feature: Error ignoring on RAPHAEL line devices. Errors are not triggers shutdown anymore. Changed: Update PMT operation rebuild. Support modern devices and use multiple factors now. Changed: Init preloader operation. Support plain preloader dumps that was created by MemoryTool. Changed: Partition listing style on LEGACY devices. In case of protected regions do not triggered shutdown anymore. Changed: Write operation now handle correctly some sparse images used in Android 9 and newer versions Service: BugFix: Format FS procedure updated BugFix: Reset FRP procedure updated BugFix: Identify procedure updated and revised New feature: eMMC life counter check during Identify - Show, if possible by Agent or HW, storage life status. LifeCycleEnd(ReadOnly), LifeCycleNearEnd states. - Support only Raphael newer than MT6739. Support NAND devices as well ( MT6570 ) UserData: New feature: Reset Privacy Locks - Support old and modern devices. Procedure is USERDATA SAFE if that required LoaderDatabase: Base Loader v1924 included Base Loader v1936 included Base Loader v1944 included New TECNO sec agents included New VIVO sec agents included New ALCATEL sec agents included New Hisense sec agents included New Moto sec agents included New Huawei sec agents included New Lenovo agents included And other different and generic models can be found in list Other: Changed: Base DB revised, unused and "buggy" types removed from BASE agents. - Change settings if DA version not contain your device platform Changed: EMIDb updated, more types supported Changed: Preloader parser now shows more complete memory details Thanks to: Special thanks to respected Mr. gracy_elec Special thanks to respected Mr. Kamal_singla Read more here 2019-12-18 Infinity [BEST] support/renew policy updated Please review updated support policy by link below. Thank you for your kind understanding and cooperation ! Read more here 2019-12-17 Laelo tool new version 0.73 released More info available by link below Read more here 2019-12-16 Infinity Data Explorer v1.02 - more devices and CPU types supported Data extraction based on full reconstruction of file system - MTK module updated: more device supported - SPD based firmware images are supported (spd6530 - spd6531 cpu) - Show Additional info (IMEIs, User Code) for SPD based firmware images - Contacts save procedure improved - GUI improvements - Analyze engine improvements - Minor bugs fixed Read more here 2019-12-11 Infinity Shell v1.52 released - models database updated - models database update procedure improved 2019-12-04 Infinity Data Explorer v1.01 - new features and improvements Data extraction based on full reconstruction of file system - NAND flash types are partially supported - Additional information extraction supported such as IMEI(s), User Code - More contacts types are supported - Open folder with result file(s) after finish: option can be enabled in `Settings` page - Minor bugs fixed Read more here 2019-11-27 Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features - Core Protocol updated Error handling, error explanation and hint module updated - Service NVM operations revized DiagMode option activated ( Platform -> Control -> DiagMode ) > Change SW mode to diag, instead of flash. Do not require BootSelection. Allow for now: 1. Identify Device - ModemInfo, Build Info, SecurityInfo, SOC Info, DeviceHW Info 2. Format FS / Reset settings ( NOT touch FRP! ) - WIPE mode 3. Read NV data, verify NV > Don't forget change SW mode between Service/Flash for those operations ! New Identify option - device Platform, Device HW details identification > Allow detect device SOC family, RAM amount for faster loader selection > Work in DiagMode, Work ON MODERN and UNISOC chipset only ! - Flasher Optimized flashing protocol Optimized older device line support NVManager updated - Identify, Backup, Security swap NVManager Recovery tool updated - Firmware Reader Optimized structure identification Activated "forced" reading. Option skip data verification. > In case of semi-damaged devices, if backup atleast of something required > In case of "Critical data damaged" errors Optimized data verification during create FW - Database: SC983xx generic loader DB updated SC9853i generic loader DB updated SC7731E generic loader DB updated SC7731x generic loader DB updated SC9863 loaders DB updated - BQ, Wiko, ZTE, Symphony SC7731c/g loaders DB updated - various models and RAM size SC9832E loaders DB updated - Meizu, Wiko Some other various models with specific hw settings included in loader DB - Other Boot Selection mode are indepedent ( loader base can be changed after FW selection, in Platform tab ) Bug fixes and changes according users requests - Special thanks to respected Mr. gracy_elec Read more here 2019-11-24 Infinity Data Explorer v1.00 - Initial Release - Data extraction based on full reconstruction of file system - Initial features 1. Phonebook records extraction from dump 2. Phonebook records export to TXT, VCF formats 3. Memory type auto detection (Manual selection also supported) 4. File system parameters (sector size, header type) auto detection (Manual selection also supported) - Supported devices: MTK with NOR flash types, in most cases based on CPU types like MT625x, MT626x, and some MT622x Read more here 2019-11-20 Laelo tool new version 0.72 released More info available by link below Read more here 2019-11-18 Infinity-Box [BEST] NK2 v1.19 - New models and features HMD Nk 105 (2019) King Nk 105 - TA-1174, TA-1203 - Identify, check securiy - Reset Settings/Format FS - Read UserCode HMD Nk 110 (2019) Nk 110 - TA-1192 - Identify, check securiy - Reset Settings/Format FS - Read UserCode HMD Nk 6.2 Starlord Nk 6.2 - TA-1187, TA-1198, TA-1200, TA-1201 - Identify - Flash Firmware - Reset Settings/Format FS - Reset FRP HMD Nk 7.2 Daredevil Nk 7.2 - TA-1178, TA-1181, TA-1193, TA-1196 - Identify - Flash Firmware - Reset Settings/Format FS - Reset FRP - Base Loader database updated ModelFinder updated Bugfixes and minor changes - BL Fixed Nk 2.2 flashing, Format FS, Reset FRP - MTK SP Updated loader database MT6761 support activated ( Nk 2.2 line ) in standalone mode - MTK FP FlashEngine updated FileSystem (Forensic) engine updated - SPD FP FlashEngine updated Nk 105, Nk 110 support activated ( partial ) - Support New firmwares for supported models can be found at support area Read more here |
| (c) Infinity-Box 2005-2024 | | Terms of Service | Privacy Policy | EULA |