|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
| |||||||
| Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
 |
| | LinkBack | Thread Tools | Display Modes |
02-25-2020, 22:29
| #1 (permalink) |
| Product Supporter  Join Date: May 2005 Location: uae
Posts: 29,245
Member: 148515 Status: Offline Thanks Meter: 19,534 | Infinity Chinese Miracle-2 MTK/Mediatek v2.08 - New models and repair features As ordinary, uniques functions and methods released. Please do not forget to download new drivers v5.1632_x86_x64 ! Core: Changed : Loader v1952 supported and tested BugFix : Rebuild support for MT6572 line ( KaiOs and old devices ) Changed : Automatic selection of higher available BASE loader at startup Changed : Automatic protocol switching for RAPHAEL line Changed : Initial META protocol support Changed : AutomaticBoot selection revised. More types and combinations are supported. Changed : Protocol updated for RAPHAEL line New feature : Meta protocol support activated !*Support Legacy line ( MT6572 .. MT6595 ) !*Support Raphael line ( MT6750 .. MT6797 ) !*Support Modern Raphael line ( MT6761, MT6765 and newer ) Function : Identify ( AP/MD, SWversion info, Security details ) Function : Reset Settings / Format FS ( NOT touch FRP ) Function : Repair security for Legacy line ( from MT6572 and up to 6580 ) Raphael line ( from MT6570 to MT6765 etc. ) !*Devices with SLA will not work for repair without auth! ( even if Meta started ) !*Devices with OTP will not work for repair! ( SW will just show write error ) Service: Changed : Format FS procedure updated BugFix : Identify procedure updated and revised Changed : eMMC life counter check ( Raphael, more accurate status handling for latest loaders ) UserData: Changed : Reset Privacy Locks procedure updated MemoryTool: BugFix : Long-run reading optimized for RAPHAEL line Firmware reader: Changed : Updated support for legacy platforms Changed : Updated support for MT6739 FP-like and KaiOS phones Changed : Local database update Changed : Data verification improved Changed : More types supported Flasher: BugFix : In some cases were made wrong SV5_BL image selection for EMI base Changed : Protocol updated for RAPHAEL line Changed : Protocol update for LEGACY line BugFix : Flash Erase ( whole mode ) revised BugFix : Flash Pre-Erase ( safe upgrade mode ) revised Other: Changed : Boot helper updated. Take attention to software logs and follow them. In most cases that enough to setup correct settings New feature : Reboot option activated in main tab. Switch charge / power off mode after operations New feature : META switch option activated in main tab. Used to switch SW between FLASH and META mode Changed : Loader database updated Changed : Minor changes in GUI, check buttons/fields hints to know more about alternative modes and special options of supported functions Info: META require working device condition. Charged battery (more than 20%). Installed drivers. New drivers v5.1632_x86_x64 is at support area. Password for files: 12345678 Drivers Download link #1 Download link #2 Download link #3 Download link #4       - How to upload files to support Infinity-Box 15 years (since year 2005) updates and support as nobody else ! Last edited by InfinityHelp; 02-26-2020 at 13:20. Reason: download links updated |
 |
| The Following 66 Users Say Thank You to InfinityHelp For This Useful Post: |
|
02-26-2020, 01:44
| #3 (permalink) |
| No Life Poster   Join Date: Mar 2007 Location: Where you live
Posts: 18,542
Member: 462970 Status: Offline Thanks Meter: 20,352 | Some tests : Code: Operation : Identify [ v2.08 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1952 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x20000000 [ 512,00 MB ]
EMMC: 90014A483447316440509A1774071AF
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : H4G1d
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0xE9000000 [ 3,64 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 28A0161AF67F2888EF3AD94EEBDFDACA
DA : USB : HIGH-SPEED
Boot done!
Patch Level : O11019
Display ID : Philips_E518_1929_V10_CN
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-06-05
Build Time : 1563604715
Product Model : Philips E518
Product Brand : Philips
Product Name : Philips E518
Product Device : Philips E518
Product Board : Philips E518
Product Manfct : Philips
Product Info : Android
Product Board : bird6739tv1_bsp_512
Board Platform : mt6739
USERDATA : ENCRYPTED
NVRAM check : Passed!
Backup sensetive data [ 8 ]
Backup path : Backup\MT6739__28A0161AF67F2888EF3AD94EEBDFDACA\
Backup done!
STORAGE : LifeStatus : OK!
Done!
Elapsed: 00:00:13
Operation : Identify [ v2.08 ]
Mode : META
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
PRELOADER : META confirmed!
Boot done!
AP_CHIP : MT6739,S01
AP_SWVR : alps-mp-o1.mp1
AP_HWVR : S01
MD_CHIP : MT6739
MD_SWTM : 2000.00.00
MD_DSPV : 1.0
MD_DSPP : MOLY.LR12A.R2.MP.V34.15
MD_SWVR : TK_MD_BASIC_HW
MD_HWVR : Unknown
IMEI[0] : 868xxxxxxxxxxxxx
IMEI[1] : 868xxxxxxxxxxxxx
Done!
Elapsed: 00:00:36
Operation : Read Firmware [ v2.08 ]
ExtSparse : Enabled
ForceRead : Disabled
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1952 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x20000000 [ 512,00 MB ]
EMMC: 90014A483447316440509A1774071AF
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : H4G1d
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0xE9000000 [ 3,64 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 28A0161AF67F2888EF3AD94EEBDFDACA
DA : USB : HIGH-SPEED
Boot done!
Patch Level : O11019
Display ID : Philips_E518_1929_V10_CN
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-06-05
Build Time : 1563604715
Product Model : Philips E518
Product Brand : Philips
Product Name : Philips E518
Product Device : Philips E518
Product Board : Philips E518
Product Manfct : Philips
Product Info : Android
Product Board : bird6739tv1_bsp_512
Board Platform : mt6739
MT6739__Philips__Philips_E518__8.1.0__Philips_E518_1929_V10_CN__O11019__Android
Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 24%
Read : system.img
ExtSparse : Compression ratio : 34%
Read : cache.img
Read : userdata.img
FW Size : 1,09 GB
Android Info saved : _Android_info.txt
Scatter : MT6739_Android_scatter.txt
Saved to : D:\MTK\MT6739__Philips__Philips_E518__8.1.0__Philips_E518_1929_V10_CN__O11019__Android\
Done!
Elapsed: 00:01:32
Created by Infinity-Box (c) 2020
Chinese Miracle II : MediaTek Service Module
Device Info file : _Android_info.txt
Patch Level : O11019
Display ID : Philips_E518_1929_V10_CN
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-06-05
Build Time : 1563604715
Product Model : Philips E518
Product Brand : Philips
Product Name : Philips E518
Product Device : Philips E518
Product Board : Philips E518
Product Manfct : Philips
Product Info : Android
Product Board : bird6739tv1_bsp_512
Board Platform : mt6739
Preloader [HW DEV] Info :
EMI : DEV : MT6739
EMI : SRC : preloader_bird6739tv1_bsp_512.bin
EMI : CNT : 000A
EMI : [00] : eMMC : DDR2 : ID : 700100454534454134 : VEN : KINGSTON | DEV : EE4EA4 : RAM : [ 512,00 MB ]
EMI : [01] : eMMC : DDR2 : ID : 90014A483447316404 : VEN : HYNIX | DEV : H4G1d : RAM : [ 512,00 MB ]
EMI : [02] : eMMC : DDR2 : ID : 90014A483447326111 : VEN : HYNIX | DEV : H4G2a : RAM : [ 512,00 MB ]
EMI : [03] : eMMC : DDR2 : ID : 1501004E4A5330304D : VEN : SAMSUNG | DEV : NJS00M : RAM : [ 512,00 MB ]
EMI : [04] : eMMC : DDR2 : ID : 110100303034474530 : VEN : TOSHIBA | DEV : 004GE0 : RAM : [ 512,00 MB ]
EMI : [05] : eMMC : DDR2 : ID : 110100303034473930 : VEN : TOSHIBA | DEV : 004G90 : RAM : [ 512,00 MB ]
EMI : [06] : eMMC : DDR3 : ID : 700100454534454434 : VEN : KINGSTON | DEV : EE4ED4 : RAM : [ 512,00 MB ]
EMI : [07] : eMMC : DDR3 : ID : 150100464A32354142 : VEN : SAMSUNG | DEV : FJ25AB : RAM : [ 512,00 MB ]
EMI : [08] : eMMC : DDR3 : ID : 150100463558354342 : VEN : SAMSUNG | DEV : F5X5CB : RAM : [ 512,00 MB ]
EMI : [09] : eMMC : DDR3 : ID : FE014E50314A39344D : VEN : MICRON | DEV : P1J94M : RAM : [ 512,00 MB ]
Operation : Write Flash [ v2.08 ]
Repartition : Enabled
Flash Verify : Enabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled
Files :18
[FL] : Set : preloader_bird6739tv1_bsp_512.bin
[FL] : Set : recovery.img
[FL] : Set : md1rom.img
[FL] : Set : md1dsp.img
[FL] : Set : spmfw.img
[FL] : Set : mcupmfw.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : loader_ext.img
[FL] : Set : loader_ext.img
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : odmdtbo.img
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img
[FL] : Total size : 0x2F82DD5C [ 760,18 MB ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1952 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x20000000 [ 512,00 MB ]
EMMC: 90014A483447316440509A1774071AF
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : H4G1d
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0xE9000000 [ 3,64 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 28A0161AF67F2888EF3AD94EEBDFDACA
DA : USB : HIGH-SPEED
Boot done!
[FL] : HW verification passed!
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000002E88000
Erase : 0x0000000003688000 : 0x0000000004000000
Erase : 0x0000000008800000 : 0x0000000000A00000
Erase : 0x0000000009500000 : 0x0000000007200000
Erase : 0x0000000010C00000 : 0x0000000000200000
Erase : 0x0000000010E20000 : 0x00000000041E0000
Erase : 0x0000000031800000 : 0x00000000B67FBE00
[FL] : RePartition
[FL] : RePartition Ok!
[FL] : Flashing now ...
Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : RECOVERY
Write : MD1IMG
Write : MD1DSP
Write : SPMFW
Write : MCUPMFW
Write : LK
Write : LK2
Write : LOADER_EXT1
Write : LOADER_EXT2
Write : BOOT
Write : LOGO
Write : ODMDTBO
Write : TEE1
Write : TEE2
Write : SYSTEM
Write : CACHE
Write : USERDATA
[FL] : RePartition
[FL] : RePartition Ok!
[FL] : Flashing finished!
Done!
Elapsed: 00:01:43
Reconnect Power/Cable! |
| |
| The Following 16 Users Say Thank You to JayDi For This Useful Post: |
|
02-26-2020, 01:47
| #4 (permalink) |
| No Life Poster Join Date: Mar 2007 Location: Where you live
Posts: 18,542
Member: 462970 Status: Offline Thanks Meter: 20,352 | Some test : Code: Operation : Identify [ v2.08 ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BOOTROM
MODE : 0_base : BASE_v1952 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 484A019065314738A1510705D9729F22
DAInf: 4 : 2 : 156
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 90014A4838473165050751A1229F72D9
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v1
INIT : 0xBC : eMMC [ 0x00000000 : [ 0 B ] ]
DRAM : DRAM: 0x40000000 [ 1,00 GB ]
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info
EMMC: 90014A483847316550751A1229F72D9
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : H8G1e
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x1D2000000 [ 7,28 GB ]
SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x40000000 [ 1,00 GB ]
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 44C62BC2552ABDD7128C00909EAD2490
STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT
DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Boot done!
Patch Level : LMY47I
Display ID : WW_Phone-user 5.1 LMY47I WW_Phone-12.0.0.67-20151021 release-keys
Ver. CodeName : REL
Ver. Release : 5.1
Build Time : 1445391143
Product Model : ASUS_Z00SD
Product Brand : asus
Product Name : WW_Phone
Product Device : ASUS_Z00SD
Product Board : ASUS_Z00SD
Product Manfct : asus
Board Platform : mt6580
Product Info : ASUS_Z00SD
USERDATA : PLAIN
IMEI[0] : 111111111111119
IMEI[1] : 222222222222228
NVRAM check : Passed!
Backup sensetive data [ 8 ]
Backup path : Backup\MT6580__44C62BC2552ABDD7128C00909EAD2490\
[3] Read : NVRAM
[14] Read : NVDATA
[2] Read : PROINFO
[7] Read : LK
[4] Read : PROTECT1
[5] Read : PROTECT2
Backup done!
Done!
Elapsed: 00:00:46
Operation : Repair Security [ v2.08 ]
Mode : META
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
PRELOADER : META confirmed!
Boot done!
MD_CHIP : MT6580, E01
MD_SWTM : 2000.00.00
MD_DSPV : 1.0
MD_DSPP : MOLY.WR8.W1449.MD.WG.MP.V6.P4
MD_SWVR : HQ6580_WE_B1A_L_HSPA_HW
MD_HWVR : Unknown
IMEI[0] : 111111111111119
IMEI[1] : 222222222222228
IMEI[0] : 35xxxxxxxxxxxxxx
Item : update Ok!
IMEI[1] : 35xxxxxxxxxxxxxx
Item : update Ok!
Done!
Elapsed: 00:00:57
Reconnect Power/Cable! |
| |
| The Following 7 Users Say Thank You to JayDi For This Useful Post: |
|
02-26-2020, 01:50
| #5 (permalink) |
| No Life Poster Join Date: Mar 2007 Location: Where you live
Posts: 18,542
Member: 462970 Status: Offline Thanks Meter: 20,352 | Some test : Code: Operation : Identify [ v2.08 ] Mode : META 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM6) MODE : PRELOADER PORT PORT : 6 Waiting BOOT ack ... PRELOADER : ACK confirmed! PRELOADER : META confirmed! Boot done! AP_CHIP : MT6752,S01 AP_SWTM : Sat Jan 31 12:16:08 CST 2015 AP_SWVR : BEE_RU_9B18S_P632A10V1.0.4 AP_HWVR : S01 MD_CHIP : MT6752, E00 MD_SWTM : 2000.00.00 MD_DSPV : 1.0 MD_DSPP : MOLY.LR9.W1423.MD.LWTG.MP.V5.P15 MD_SWVR : AEON6752_LWT_NJ_KK_MD1_HW MD_HWVR : Unknown IMEI[0] : 86xxxxxxxxxxxxx IMEI[1] : 86xxxxxxxxxxxxx Done! Elapsed: 00:00:36 Operation : Repair Security [ v2.08 ] Mode : META 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM6) MODE : PRELOADER PORT PORT : 6 Waiting BOOT ack ... PRELOADER : ACK confirmed! PRELOADER : META confirmed! Boot done! AP_CHIP : MT6752,S01 AP_SWTM : Sat Jan 31 12:16:08 CST 2015 AP_SWVR : BEE_RU_9B18S_P632A10V1.0.4 AP_HWVR : S01 MD_CHIP : MT6752, E00 MD_SWTM : 2000.00.00 MD_DSPV : 1.0 MD_DSPP : MOLY.LR9.W1423.MD.LWTG.MP.V5.P15 MD_SWVR : AEON6752_LWT_NJ_KK_MD1_HW MD_HWVR : Unknown IMEI[0] : 86xxxxxxxxxxxxxx IMEI[1] : 86xxxxxxxxxxxxxx IMEI[0] : 86xxxxxxxxxxxxx Item : update Ok! IMEI[1] : 86xxxxxxxxxxxxx Item : update Ok! Done! Elapsed: 00:01:00 |
| |
| The Following 10 Users Say Thank You to JayDi For This Useful Post: |
|
02-26-2020, 01:51
| #6 (permalink) |
| No Life Poster Join Date: Mar 2007 Location: Where you live
Posts: 18,542
Member: 462970 Status: Offline Thanks Meter: 20,352 | Some test : Code: Operation : Repair Security [ v2.08 ] Mode : META 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM6) MODE : PRELOADER PORT PORT : 6 Waiting BOOT ack ... PRELOADER : ACK confirmed! PRELOADER : META confirmed! Boot done! AP_CHIP : MT6761 AP_SWTM : Mon Jun 3 14:18:24 CST 2019 AP_SWVR : alps-mp-p0.mp1-V5.97 MD_CHIP : MT6761 MD_SWTM : 2000.00.00 MD_DSPV : 1.0 MD_DSPP : E557_61_P0_LWTG_V0.2.0_S190528 MD_SWVR : TK_MD_BASIC_HW MD_HWVR : Unknown IMEI[0] : 35xxxxxxxxxxxxxx IMEI[1] : 35xxxxxxxxxxxxxx IMEI[0] : 86xxxxxxxxxxxxxx Item : update Ok! IMEI[1] : 86xxxxxxxxxxxxxx Item : update Ok! Done! Elapsed: 00:00:42 Reconnect Power/Cable! Code: Operation : Reset Settings/Format FS [ v2.08 ] Mode : META 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM6) MODE : PRELOADER PORT PORT : 6 Waiting BOOT ack ... PRELOADER : ACK confirmed! PRELOADER : META confirmed! Boot done! AP_CHIP : MT6761 AP_SWTM : Mon Jun 3 14:18:24 CST 2019 AP_SWVR : alps-mp-p0.mp1-V5.97 Format Ok : UserData Done! Elapsed: 00:00:33 Reconnect Power/Cable! |
| |
| The Following 12 Users Say Thank You to JayDi For This Useful Post: |
|
02-26-2020, 05:45
| #11 (permalink) |
| No Life Poster  Join Date: May 2008
Posts: 3,013
Member: 770503 Status: Offline Thanks Meter: 1,215 | HUAWEI Y6 Pro Code: Operation : Identify [ v2.08 ] Mode : META 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM9) MODE : PRELOADER PORT PORT : 9 Waiting BOOT ack ... PRELOADER : ACK confirmed! PRELOADER : META confirmed! Boot done! AP_CHIP : MT6735,S01 AP_SWTM : Fri Sep 9 08:27:43 CST 2016 AP_SWVR : ALPS.L1.MP3.V2_ONTIM6735.66T.L1_P73 AP_HWVR : S01 MD_CHIP : MT6735, E00 MD_SWTM : 2000.00.00 MD_DSPV : 1.0 MD_DSPP : MOLY.LR9.W1444.MD.LWTG.MP.V16.P37.T1 MD_SWVR : ONTIM6735_65C_L1_HW MD_HWVR : Unknown IMEI[0] : IMEI[1] : Done! Elapsed: 00:00:50 |
| |
|
02-26-2020, 06:35
| #15 (permalink) |
| No Life Poster  Join Date: Jul 2005 Location: player /-GSM-\ Field
Posts: 3,612
Member: 161115 Status: Offline Sonork: Here you can find it... Thanks Meter: 3,039  | new driver v5.1632_x86_x64. http://www.mediafire.com/file/4ux1yt...32.00.zip/file Last edited by SHOEB AHMED; 02-26-2020 at 06:43. |
| |
| The Following 8 Users Say Thank You to SHOEB AHMED For This Useful Post: |
|
| Bookmarks |
| |
|
|
Linear Mode
