Infinity Chinese Miracle-2 MTK/Mediatek v2.01 - LEGACY support and other features - GSM-Forum

InfinityHelp · 11-07-2018, 00:22

Infinity Chinese Miracle-2 MTK/Mediatek v2.01 - LEGACY support and other features

Important:
- Software installed to new folder /CM2MT2/ and designed to support new models

Legacy core support activated:
MT6571
MT6572
MT6580
MT6582
MT6589
MT6592
MT6595
MT6597
MT6732
MT6735
MT6737
MT6752
MT6753
MT6795
MT8127
MT8163
MT8321
MT8732
MT8735
MT8752

Identify: full device info, security info
Flash Factory Firmware
Read Factory Firmware
Reset Settings / Format FS
Reset FRP
Repair Security (Flash Mode, Direct)
SP unlock
MemoryTool - complete device control, service, repair, forensic etc.

- Main
Loader database optimized, size reduced.
DA v1820 line support tested and activated
DA v1836 line support tested and activated
Connection level revised
BROM level support optimized
Optimized and changed HighSpeed port selection
FlashEngine revised
NVRAM tool revised
Global option PWM - allow switch SW between two different work modes for RAPHAEL.
> Use second one if first mode give errors at writing f.e. restore NVRAM on F5 like device etc.
> For LEGACY phone it used in MEMORY TOOL ( WRITE / WIPE )

- Service
Repair Security revised
> Old LEGACY types require FORMAT FS/FACTORY RESET for accept changes !
Format FS - new mode activated: Forced Erase
Format FS - fixed WIPE mode

- Core
EMIDB updated
New EMI engine for LEGACY line
> EMI engine support almost all existing LEGACY line
> New types for RAPHAEL included

- FW reader
LEGACY core supported ( unsigned and static signed types are supported )
New types of firmwares supported
Scatter creation optimized

- Other
Settings tab activated ( firmware path settings and other features can be found here )
AutoUpdate ( module files ) feature activated

Many other changes and fixes

Known issues/warnings/info:
1. FileSystem flashing on some SBC-enabled RAPHAEL devices (except SYSTEM/CACHE/USER) may fail ! Solution - exclude them from flashing list.
2. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list !
3. MT6589 supported ONLY up to DAv17xx line, after DAv1728 support has been removed.
4. MT6592 support on DAv18xx loader line broken ( DA issue )
5. EMI/DRAM init module in LEGACY line is almost auto, but in some case require CHANGE EMI setting, if used internal DB ( since much RAMsize/Revision of eMMC/eMCP )
6. MOST of LEGACY phone can be booted via BROM mode from now ( PLAIN, PRL, SBC )
7. NAND support on LEGACY line is not activated yet

Download link

Subscribe to Telegram channel and get news faster !

How to upload files to support

Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News

Twitter - Facebook - Telegram

yosbel182us · 11-07-2018, 00:39

Please Add Important Functions TEST EMMC & RAM

caldasunlockgsm · 11-07-2018, 00:59

Excellent news I was tired of always modifying DA to be able to work the segurity boot

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x05000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with CERT
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464E58324D42014FC7E4FD34D1
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM2XN
[eMMC] : FLASH_CID : 150100464E58324D42014FC7E4FD34D1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x0F4DE466E0CA9B7FA0575DCA58EB665C
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : motorola
ProdName : watson_50
ProdModel : Moto C
Device : watson
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-n0.mp2-V1_wt6580.we.n_P38

Done!
Elapsed: 00:00:08
Reconnect Power/Cable!

lingosh · 11-07-2018, 01:04

mtk lock screen without lost data

kothamamun · 11-07-2018, 04:21

world first update,but everybody please renew your cm2 dongle otherwise not possible to use.

Emsel · 11-07-2018, 05:03

Good update, team add support for TEST HARDWARE READ/WRITE EMMC AND RAM

logicmobile · 11-07-2018, 05:35

Not able to update dongle

showing error ( no more update dont try again today )

Dongle manager version 1.72

mr.rango · 11-07-2018, 05:51

how to update our dongle for this update to work?

**>>Gsmmilon>>** · 11-07-2018, 05:54

need use this version without renewal

logicmobile · 11-07-2018, 06:05

Quote:

Originally Posted by >>Gsmmilon>>

need use this version without renewal

same here , same error showing

localizator · 11-07-2018, 06:31

Quote:

Originally Posted by logicmobile

same here , same error showing

For CM2MT2 2.01 need smard card firmware version 1.37. Renew support and update smard card with dongle manager

nasch · 11-07-2018, 06:53

great update. Add ....
add sreen lock remove wo lost data.
EMMC Test
we need update for SPD module plz.

You are the best

bright hlatini · 11-07-2018, 07:03

please support mobicel rebel privacy lock mtk legacy , full factory reset all not working to remove privacy

Kirumira · 11-07-2018, 07:10

Quote:

Originally Posted by logicmobile

Not able to update dongle

showing error ( no more update dont try again today )

Dongle manager version 1.72

Quote:

Originally Posted by mr.rango

how to update our dongle for this update to work?

Hello,

Time to Renew support,
Check dongle support Expiry date.
How to check here https://www.infinity-box.com/doc.php?id=17
If Expired contact your
Nearest Resellers for Support Renewal.

ahmer5050 · 11-07-2018, 07:19

Plz TEam Add Latest Oppo Secure MTK Chip....
Thanks For This Update .

11-07-2018, 00:22	#1 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	Infinity Chinese Miracle-2 MTK/Mediatek v2.01 - LEGACY support and other features Infinity Chinese Miracle-2 MTK/Mediatek v2.01 - LEGACY support and other features Important: - Software installed to new folder /CM2MT2/ and designed to support new models Legacy core support activated: MT6571 MT6572 MT6580 MT6582 MT6589 MT6592 MT6595 MT6597 MT6732 MT6735 MT6737 MT6752 MT6753 MT6795 MT8127 MT8163 MT8321 MT8732 MT8735 MT8752 Identify: full device info, security info Flash Factory Firmware Read Factory Firmware Reset Settings / Format FS Reset FRP Repair Security (Flash Mode, Direct) SP unlock MemoryTool - complete device control, service, repair, forensic etc. - Main Loader database optimized, size reduced. DA v1820 line support tested and activated DA v1836 line support tested and activated Connection level revised BROM level support optimized Optimized and changed HighSpeed port selection FlashEngine revised NVRAM tool revised Global option PWM - allow switch SW between two different work modes for RAPHAEL. > Use second one if first mode give errors at writing f.e. restore NVRAM on F5 like device etc. > For LEGACY phone it used in MEMORY TOOL ( WRITE / WIPE ) - Service Repair Security revised > Old LEGACY types require FORMAT FS/FACTORY RESET for accept changes ! Format FS - new mode activated: Forced Erase Format FS - fixed WIPE mode - Core EMIDB updated New EMI engine for LEGACY line > EMI engine support almost all existing LEGACY line > New types for RAPHAEL included - FW reader LEGACY core supported ( unsigned and static signed types are supported ) New types of firmwares supported Scatter creation optimized - Other Settings tab activated ( firmware path settings and other features can be found here ) AutoUpdate ( module files ) feature activated Many other changes and fixes Known issues/warnings/info: 1. FileSystem flashing on some SBC-enabled RAPHAEL devices (except SYSTEM/CACHE/USER) may fail ! Solution - exclude them from flashing list. 2. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list ! 3. MT6589 supported ONLY up to DAv17xx line, after DAv1728 support has been removed. 4. MT6592 support on DAv18xx loader line broken ( DA issue ) 5. EMI/DRAM init module in LEGACY line is almost auto, but in some case require CHANGE EMI setting, if used internal DB ( since much RAMsize/Revision of eMMC/eMCP ) 6. MOST of LEGACY phone can be booted via BROM mode from now ( PLAIN, PRL, SBC ) 7. NAND support on LEGACY line is not activated yet Download link Subscribe to Telegram channel and get news faster ! How to upload files to support Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News Twitter - Facebook - Telegram

11-07-2018, 00:39	#2 (permalink)
yosbel182us No Life Poster Join Date: Jan 2014 Location: CUBA Age: 32 Posts: 546 Member: 2108610 Status: Offline Thanks Meter: 379	Please Add Important Functions TEST EMMC & RAM

11-07-2018, 00:59	#3 (permalink)
caldasunlockgsm Freak Poster Join Date: Jun 2008 Location: GSMFILE.CO Posts: 140 Member: 790437 Status: Offline Thanks Meter: 38	Excellent news I was tired of always modifying DA to be able to work the segurity boot Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 4 ] Sync... Inital Boot Ok! BB_CPU_PID : 6580 BB_CPU_NME : [MediaTek] MT6580_S00 BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x05000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : LOCKED with CERT Processing DA stage DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x94 NAND Flash : NOT INSTALLED eMMC Flash : 150100464E58324D42014FC7E4FD34D1 Initialize Memory ... DRAM already initialized by Preloader DAgent sent , init HW now eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0x15 , OEM : 0100 [eMMC] : FLASH_INF : [SAMSUNG] , BM2XN [eMMC] : FLASH_CID : 150100464E58324D42014FC7E4FD34D1 [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000 [eMMC] : FLASH_LEN : 0x00000001D2000000 [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB] DEV RID : 0x0F4DE466E0CA9B7FA0575DCA58EB665C INT RAM : 0x00020000 EXT RAM : 0x40000000 [1 GiB] BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! [AP] : Initial info read Ok! Brand : motorola ProdName : watson_50 ProdModel : Moto C Device : watson AndroidVer: 7.0 MTKxCPU : MT6580 MTKxPRJ : alps-mp-n0.mp2-V1_wt6580.we.n_P38 Done! Elapsed: 00:00:08 Reconnect Power/Cable!

11-07-2018, 01:04	#4 (permalink)
lingosh Freak Poster Join Date: Jan 2015 Location: jabbes Posts: 153 Member: 2324451 Status: Offline Thanks Meter: 38	mtk lock screen without lost data

11-07-2018, 04:21	#5 (permalink)
kothamamun No Life Poster Join Date: Apr 2016 Location: B A N G L A D E S H Posts: 3,188 Member: 2556542 Status: Offline Thanks Meter: 1,790	world first update,but everybody please renew your cm2 dongle otherwise not possible to use.

11-07-2018, 05:03	#6 (permalink)
Emsel Registered User Join Date: Apr 2015 Location: Cuba Posts: 448 Member: 2381725 Status: Offline Thanks Meter: 126	Good update, team add support for TEST HARDWARE READ/WRITE EMMC AND RAM

11-07-2018, 05:35	#7 (permalink)
logicmobile No Life Poster Join Date: Apr 2009 Location: Lake Mary (Orlando) Posts: 753 Member: 1016569 Status: Offline Thanks Meter: 229	Not able to update dongle showing error ( no more update dont try again today ) Dongle manager version 1.72

11-07-2018, 05:51	#8 (permalink)
mr.rango Junior Member Join Date: May 2018 Posts: 2 Member: 2834928 Status: Offline Thanks Meter: 0	how to update our dongle for this update to work?

11-07-2018, 05:54	#9 (permalink)
>>Gsmmilon>> Product Manager Join Date: Mar 2014 Location: Bangladesh Age: 30 Posts: 2,172 Member: 2142580 Status: Offline Thanks Meter: 1,214	need use this version without renewal

11-07-2018, 06:53	#12 (permalink)
nasch Crazy Poster Join Date: Apr 2017 Posts: 50 Member: 2708690 Status: Offline Thanks Meter: 7	great update. Add .... add sreen lock remove wo lost data. EMMC Test we need update for SPD module plz. You are the best

11-07-2018, 07:03	#13 (permalink)
bright hlatini No Life Poster Join Date: Jul 2011 Location: malawi Posts: 1,121 Member: 1614640 Status: Offline Thanks Meter: 468	please support mobicel rebel privacy lock mtk legacy , full factory reset all not working to remove privacy

11-07-2018, 07:19	#15 (permalink)
ahmer5050 No Life Poster Join Date: Apr 2015 Location: LOOLCANO Taba Day. Posts: 1,882 Member: 2385819 Status: Offline Sonork: No More Used Thanks Meter: 827	Plz TEam Add Latest Oppo Secure MTK Chip.... Thanks For This Update .